6spd 650ftlbs ACT clutch and FIDANZA flywheel
#1
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Mar 2006
Posts: 834
Likes: 0
Received 0 Likes
on
0 Posts
6spd 650ftlbs ACT clutch and FIDANZA flywheel
I have an ACT Clutch kit, from memory the code is SB4-HDG6.
It is rated for 660 ftlbs, and comprises of a 6puk sprung clutch plate and Heavy duty Pressure plate.
Also i have a Fidanza Billet Flywheel, in mind they were by far the best option i could find, and i quite liked the idea of the Friction surface being removeable.
All these have only 2k miles on them, 1500 of which were running in a new build. And car only ever made 450ftlbs so i wasnt close to clutches potential.
In my car the clutch pedal was as light as standard clutch.. suprisingly.. and i found it very good and easy to drive.
Only reason i am changing is i have the engine out and i have a chance at a really cheap Triple plate, only for that i would be keeping it.
On the plus side for the buyer, i had a stupid accident with the clutch plate, which involved it being drove over.. dont ask.
So i have bought a brand new Plate from ACT for it... So you get a new Clutch Disk.
New spiggot bearing and release bearing were used and come with it.
Think this all comes in at 800pound or more,
so im asking 500 for it, delivery to UK will be @ + £30
[
It is rated for 660 ftlbs, and comprises of a 6puk sprung clutch plate and Heavy duty Pressure plate.
Also i have a Fidanza Billet Flywheel, in mind they were by far the best option i could find, and i quite liked the idea of the Friction surface being removeable.
All these have only 2k miles on them, 1500 of which were running in a new build. And car only ever made 450ftlbs so i wasnt close to clutches potential.
In my car the clutch pedal was as light as standard clutch.. suprisingly.. and i found it very good and easy to drive.
Only reason i am changing is i have the engine out and i have a chance at a really cheap Triple plate, only for that i would be keeping it.
On the plus side for the buyer, i had a stupid accident with the clutch plate, which involved it being drove over.. dont ask.
So i have bought a brand new Plate from ACT for it... So you get a new Clutch Disk.
New spiggot bearing and release bearing were used and come with it.
Think this all comes in at 800pound or more,
so im asking 500 for it, delivery to UK will be @ + £30
[
Last edited by kenc; 29 May 2013 at 09:00 AM.
#6
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Mar 2006
Posts: 834
Likes: 0
Received 0 Likes
on
0 Posts
From the fidanza site...
fidanza flywheel aluminum 9.5 lbs made from heavy-duty 6061 t6 aluminum features improved heat dissipation and weight reduction comes with friction surface made from 1045 steel and attached with military grade aerospace fasteners incorporates 1050 heat treated steel ring gear that is pressed on and secured with grade 8 button screws for maximum durability utilizes a stepped dowel system to ensure dowels to become locked into place can be matched with any type of clutch material
Trending Topics
#14
Scooby Regular
Join Date: Nov 2012
Location: North East Subaru Forum
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Ah feek that puts the price tag up way too high bud..
No offence to you but I only do cash collect as you hear way too many horror stories and half a G is a lot of money
No offence to you but I only do cash collect as you hear way too many horror stories and half a G is a lot of money
#17
Scooby Regular
iTrader: (12)
Join Date: Jun 2007
Location: Moved to the Darkside
Posts: 5,034
Likes: 0
Received 0 Likes
on
0 Posts
I wouldn't hesitate to use Ken again, and if this clutch is still around in a month I imagine I will
Free bump.
Thread
Thread Starter
Forum
Replies
Last Post
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM