holset h2a turbo (550-600hp), ext wastegate etc
10 January 2013, 07:55 AM
#1
holset h2a turbo (550-600hp), ext wastegate etc
Genuine Holset H2a (i.e. the HX40 predecessor) turbo for sale from my project.
58mm inducer compressor wheel and a hx40 sized exhaust wheel (65mm). It's got the original holset housing (18cm twin scroll) with what looks like a t3 pattern, and I've also got a brand new aftermarket turbine housing for it (9cm single scroll, t3 pattern).
The 9cm housing should make it spool by about 3800-4000 RPM on a 2.0 (looking at what the Mitsubishi DSM guys over the pond achieve).
The turbo has a little bit of side to side play, but not excessive (i.e. it has some wear, but is not totally bolloxed). I'd be happy to run the turbo as is on my car, but either way, there's also a genuine Holset repair kit included (the holsets are component balanced and do not need assembly balancing).
Looking for 400 for the above or reasonable offers.
I've also got an external wastegate to go with the above. It's a 50mm HKS style wastegate (not original, bought from the store "biltema" in Sweden a couple of years back to use on one of my old projects (1000 pound challenge project http://www.uksaabs.co.uk/UKS/viewtop...ound+challenge)).
Looking for 30 quid for the wastegate.
Reason for sale is that with kids, house etc etc I have little spare time to fabricate the pipework etc that is needed on the impreza to run this, and as I want to use my car on track this year, I've decided to take the path of least pain/time and get a smaller standard fit turbo for it for now.
58mm inducer compressor wheel and a hx40 sized exhaust wheel (65mm). It's got the original holset housing (18cm twin scroll) with what looks like a t3 pattern, and I've also got a brand new aftermarket turbine housing for it (9cm single scroll, t3 pattern).
The 9cm housing should make it spool by about 3800-4000 RPM on a 2.0 (looking at what the Mitsubishi DSM guys over the pond achieve).
The turbo has a little bit of side to side play, but not excessive (i.e. it has some wear, but is not totally bolloxed). I'd be happy to run the turbo as is on my car, but either way, there's also a genuine Holset repair kit included (the holsets are component balanced and do not need assembly balancing).
Looking for 400 for the above or reasonable offers.
I've also got an external wastegate to go with the above. It's a 50mm HKS style wastegate (not original, bought from the store "biltema" in Sweden a couple of years back to use on one of my old projects (1000 pound challenge project http://www.uksaabs.co.uk/UKS/viewtop...ound+challenge)).
Looking for 30 quid for the wastegate.
Reason for sale is that with kids, house etc etc I have little spare time to fabricate the pipework etc that is needed on the impreza to run this, and as I want to use my car on track this year, I've decided to take the path of least pain/time and get a smaller standard fit turbo for it for now.
Thread
Thread Starter
Forum
Replies
Last Post
