Selling Up, Everything must go. (Ammended)
13 September 2012, 08:23 PM
#1
Selling Up, Everything must go. (Ammended)
Ive decided the Time has come to sell up and scratch my Evo itch.
Therefore everything us up for grabs.
Put your names down for whatever you want but nothing goes until the shell gets sold
I'll start with those.
Shell V3 Type R V Limited
Shell is freshly painted, inside, outside and underneath.
FIA Approved custom cages weld in Group N cage
All Glass,
Both Doors
both mirrors
Carbon rear wing
Full wiring loom
Roof vent
Welded subframe for drivers seat
Rear lights
Boot
Alloy Bonnet.
STI Quick rack.
Arches Cut and welded with ABW wide arches fitted and painted.
Ideally I'd like it sold with the brakes and coil overs to save me stripping it and to keep the shell a rooling shell.
So With BC RM coilovers (1500 miles old) and Ksport 330 8 pots (1500miles old) £5000
Without Coilovers and brakes £4000.
As an extra incentive to shift it quicker Im willing to do a special offer. Brace yourself as this is a bargain.
Shell as described above with flocked dash
Ksport 8 pot brakes,
BR RM series Coilovers (inverted type)
Complete UK Six speed setup with rear diff shafts R180 hubs and brembo brakes
This is all currently fitted to the car.
£6000!!!!!!
Complete 6 Speed set up
And I mean complete,
Non DCCD six speed, Linkage, Brand new Gear ****, Cradle, propshaft, R180 Rear diff, R180 Rear Shafts, R180 rear hubs and Two pot brembos. It will also include new age front hubs and thicker front drive shafts. £2500
Will spilt,
Gearbox Linkage, geaknob, cradle Prop £1500
Rear R180 Diff (3.545) £250
Rear R180 Drive shafts £100 each
Two pot rear brembo set up £250
Rear R180 two put hubs £150
Thicker newage front drive shafts (will fit classics) 75 each
New age front hubs (new bearings) £150
Complete RCM Twisted Turbo setup with SC Billet 35R
Again complete means complete and consists of the following.
Latest design RCM twisted kit,
GT Spec Tubular heads
Scooby Clinic Billet 35R Turbo
Tial 44m External waste gate
Turbosmart 4 port boost controller.
Headers, up pipe and down pipe are all freshly wrapped with DEI Titanium wrap
Looking for £2000 all in
will split £1000 for turbo £1000 for the rest.
RS500 Intercooler set UpIntercooler core, Rad and slimline fan setup and Pipework for GT30R £200
RCM Track attack catch can with return to sump setup
£225
Complete fuel set up
This is a complete setup from the boot to the engine
Walbro 255 intank pump with -6 tank cap modification
SM engineering swirl pop -6 inlets - 8 pump feed
All braided hoses with -6 fittings
Bosch 044 inline pump
Billet fuel rails with -6 fittings
Fuel lab fuel filter
Injector Dynamics 1000cc injectors
SX fuel pressure regulator
£750
Exedy Hyper Twin Plate Clutch kit
3000 miles use plate thickness 3.9mm (4.2new) with release bearing
£800
Pre Facelift flocked dash£100
Forged 2.5 Engine
Pinned 2.5 Block
14mm Headstuds (RCM)
OEM 2.5 crank
Pauter Rods
Cosworth Pistons
RCM 12 oil pump
New Modine
RCM water pump
Engine has running in miles only (1500 miles)
2.5 AVCS heads (D25)
Supertech Nitrided Stainless Inlet Valves
Supertech Inconel Exhaust Valves
Supertech Double Valve Springs
Supertech Titanium Lifters
RCM spring seats
CDF racing Vernier exhaust pulleys
Cosworth sump Baffle plate.
Tumble delete housings
Newage manifold with throttle body
Good for 600bhp and beyond £4000 complete.
Or Short motor £2500
Heads £1500
Will only split engine if I cannnot sell it as a long motor
for pictures of anything see my projects thread.
I will also seriously consider offers over £10K for everything (this is minus the turbo as Ive sold that)
Serious enquiries only.
Cheers
Daz
Therefore everything us up for grabs.
Put your names down for whatever you want but nothing goes until the shell gets sold
I'll start with those.
Shell V3 Type R V Limited
Shell is freshly painted, inside, outside and underneath.
FIA Approved custom cages weld in Group N cage
All Glass,
Both Doors
both mirrors
Carbon rear wing
Full wiring loom
Roof vent
Welded subframe for drivers seat
Rear lights
Boot
Alloy Bonnet.
STI Quick rack.
Arches Cut and welded with ABW wide arches fitted and painted.
Ideally I'd like it sold with the brakes and coil overs to save me stripping it and to keep the shell a rooling shell.
So With BC RM coilovers (1500 miles old) and Ksport 330 8 pots (1500miles old) £5000
Without Coilovers and brakes £4000.
As an extra incentive to shift it quicker Im willing to do a special offer. Brace yourself as this is a bargain.
Shell as described above with flocked dash
Ksport 8 pot brakes,
BR RM series Coilovers (inverted type)
Complete UK Six speed setup with rear diff shafts R180 hubs and brembo brakes
This is all currently fitted to the car.
£6000!!!!!!
Complete 6 Speed set up
And I mean complete,
Non DCCD six speed, Linkage, Brand new Gear ****, Cradle, propshaft, R180 Rear diff, R180 Rear Shafts, R180 rear hubs and Two pot brembos. It will also include new age front hubs and thicker front drive shafts. £2500
Will spilt,
Gearbox Linkage, geaknob, cradle Prop £1500
Rear R180 Diff (3.545) £250
Rear R180 Drive shafts £100 each
Two pot rear brembo set up £250
Rear R180 two put hubs £150
Thicker newage front drive shafts (will fit classics) 75 each
New age front hubs (new bearings) £150
Complete RCM Twisted Turbo setup with SC Billet 35R
Again complete means complete and consists of the following.
Latest design RCM twisted kit,
GT Spec Tubular heads
Scooby Clinic Billet 35R Turbo
Tial 44m External waste gate
Turbosmart 4 port boost controller.
Headers, up pipe and down pipe are all freshly wrapped with DEI Titanium wrap
Looking for £2000 all in
will split £1000 for turbo £1000 for the rest.
RS500 Intercooler set UpIntercooler core, Rad and slimline fan setup and Pipework for GT30R £200
RCM Track attack catch can with return to sump setup
£225
Complete fuel set up
This is a complete setup from the boot to the engine
Walbro 255 intank pump with -6 tank cap modification
SM engineering swirl pop -6 inlets - 8 pump feed
All braided hoses with -6 fittings
Bosch 044 inline pump
Billet fuel rails with -6 fittings
Fuel lab fuel filter
Injector Dynamics 1000cc injectors
SX fuel pressure regulator
£750
Exedy Hyper Twin Plate Clutch kit
3000 miles use plate thickness 3.9mm (4.2new) with release bearing
£800
Pre Facelift flocked dash£100
Forged 2.5 Engine
Pinned 2.5 Block
14mm Headstuds (RCM)
OEM 2.5 crank
Pauter Rods
Cosworth Pistons
RCM 12 oil pump
New Modine
RCM water pump
Engine has running in miles only (1500 miles)
2.5 AVCS heads (D25)
Supertech Nitrided Stainless Inlet Valves
Supertech Inconel Exhaust Valves
Supertech Double Valve Springs
Supertech Titanium Lifters
RCM spring seats
CDF racing Vernier exhaust pulleys
Cosworth sump Baffle plate.
Tumble delete housings
Newage manifold with throttle body
Good for 600bhp and beyond £4000 complete.
Or Short motor £2500
Heads £1500
Will only split engine if I cannnot sell it as a long motor
for pictures of anything see my projects thread.
I will also seriously consider offers over £10K for everything (this is minus the turbo as Ive sold that)
Serious enquiries only.
Cheers
Daz
Last edited by dazdavies; 16 September 2012 at 11:50 AM.
Can I have dibs on the RS500 setup please?
13 September 2012, 09:05 PM
#5
OK I'll list here who has dibs on what and update accordingly. These are all subject to the big cost items going othewise its just not viable.
Coilovers and brakes if they dont go with the shell - Sweden
Carbon Wing - Sweden
Banny RS500 Setup - Banny
Rotated Kit - Tweaks
Catch Can - Dan Lewis
Coilovers and brakes if they dont go with the shell - Sweden
Carbon Wing - Sweden
Banny RS500 Setup - Banny
Rotated Kit - Tweaks
Catch Can - Dan Lewis
Last edited by dazdavies; 14 September 2012 at 11:15 AM.
Trending Topics
14 September 2012, 08:04 AM
#10
Thread
Thread Starter
Forum
Replies
Last Post
serpico
ScoobyNet General
20
01 April 2019 07:47 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM