Scooby David

iTrader: (3)

Hi all

I am selling a set of Glow Shift performance gauges i purchased for my Impreza but due to breaking the car i am no longer in need of them.

The dials are smart dials and look the part. I have for sale a boost gauge, oil pressure and water temp all come with the relevant wiring and senders etc so everything you need to get them up and running. They come with all the instructions and boxes, 3 gauge pod and are in excellent condition.

I am after £100 for the lot and as most of you know that is cheap for 3 decent gauges.

Please see pic below.

yabbadoo4

iTrader: (8)

any more pics bud?

Fragmau5

iTrader: (5)

these slightly different to the video, as the ones in the advert have 2 buttons, and these have one?

also, do the gauges come out of the pods, or are they built in?

Scooby David

iTrader: (3)

Yes of course, what would you like me to take pics of?

Sorry, i didnt take notice of that, well done for spotting it, i will see if i can find another video of them in operation.

Yes, they are fully removeable from the pods so can be put in whatever pod you want.

Just for info the retail value for all 3 is £279, i will try to find a spec sheet for everyone.

yabbadoo4

iTrader: (8)

pics of the wiring plz bud im s**t at wiring so would have to be real easy to fit lol. also do they just come on the little plinth they sit on in the first pic or is there a pillar pod with them?

si324

If they have the recall function I will take them

Scooby David

iTrader: (3)

Wiring is basic really mate, i have taken a pic below of the wires and senders etc. Because they are all the same brand you can connect them together so they can be wired as a group rather then having to wiring all the gauges individually so basically the red wire is switched live for all the gauges, the black is earth, yellow perm live etc etc. I have the full fitting instructions so shouldnt be difficult for anyone to install.

Also have a load of wire with it so if you need to extend any of the wires it wont be a problem.

They only come with the pod pictured but can be removed for fitting into any pod you desire.

Craigemaim

what size are the gauges?

Scooby David

iTrader: (3)

52mm

yabbadoo4

iTrader: (8)

As per the previous posters question are these not the ones in the video then? Do they have the recall function or not? And are they the seven colour changing ones ? Sorry for all the questions but I am interested in them.

Scooby David

iTrader: (3)

No sorry mate, they arent the ones in the video which is why i have taken the video off, i didnt realise and dont want to miss sell them, but yes they are the seven colour changing ones.

Boost Gauge Details:

2 1/16 Inch (52mm) Black Face Gauge with a Magnified Tinted Lens
Boost Reading from 0 to 30PSI
Vacuum and Compression Levels Between -25 to 0 in HG
7 Color LED Through Dial Lighting with Color Recall Ability
7 Solid Color Settings and Two Color Cycle Modes
Dimmer Wire Allows the Gauge to Dim 30%
6 Feet of Vacuum Hose and T-Fitting
Mounting Hardware
Installation Instructions
Free Lifetime Technical Support

Oil Pressure Details:

2 1/16 (52mm) Inch Black Face Gauge with a Magnified Tinted Lens
Oil Pressure Reading from 0 to 100PSI
7 Color LED Through Dial Lighting with Color Recall Ability
7 Solid Color Settings and Two Color Cycle Modes
Dimmer Wire Allows the Gauge to Dim 30%
Electronic Oil Pressure Sensor with 1/8th NPT Male Threads
Mounting Hardware
Installation Instructions
Free Lifetime Technical Support

Water Temp Details:

2 1/16 Inch (52mm) Black Face Gauge with a Magnified Tinted Lens
Water Temperature Reading from 100 to 300 Degrees Fahrenheit
7 Color LED Through Dial Lighting with Color Recall Ability
7 Solid Color Settings and Two Color Cycle Modes
Dimmer Wire Allows the Gauge to Dim 30%
Electronic Water Temperature Sensor with 1/8th NPT Male Threads
Mounting Hardware
Installation Instructions
Free Lifetime Technical Support

Craigemaim

Is it an oil temp or oil pressure gauge? 1st feed state temp, and ur description states pressure.
Thanks

Scooby David

iTrader: (3)

Its oil pressure, will alter the original post to match, sorry mate.

yabbadoo4

iTrader: (8)

do you have the sandwich plate adaptor as well m8 as i think you need 1 to read the oil pressure? could you post a pic of all the items together so as to see all the bits that come included in the sale? cheers.

Scooby David

iTrader: (3)

Hi mate

Please see pic below of included stuff, it is everything you need to install them. I have the boxes as well but havent taken pics of those. You dont have to use a sandwich plate, people use them from ease as the oil filter i guess is more accessible, the sender unit included can go into the stock location.

yabbadoo4

iTrader: (8)

hi again bud, sorry for being really thick but where do the sensors go on the engine? is there points on the engine already that they screw into? still interested

peter zippy reid

iTrader: (25)

The sensor for oil pressure under the alternator the water sensor i bought a 38mm adaptor of ebay and the boost tees into the hose going into the dumpvalve

yabbadoo4

iTrader: (8)

cheers m8 i knew about boost gauge i fitted my own it was the others i wondered about. so there is a point on the engine that it screws into under the alternator? i see the sensor has a 1\8th screw size so im assuming there is mounting points on the block that they screw into?

peter zippy reid

iTrader: (25)

As you look straight down behind the alternator you will see the oem oil sensor unscrew it and get this item off ebay number is 400252226744 screw that in place then put the old sensor in the top of the braided hose and put the one that comes with the gauge in too as there two holes

yabbadoo4

iTrader: (8)

nice one m8. ill check it out cheers.

yabbadoo4

iTrader: (8)

just as a heads up m8 these are on ebay brand new for £124 without the little plinth tho.

99jdee

Ill give you £60 lol

Scooby David

iTrader: (3)

Reduced to £80 delivered.

Scooby David

iTrader: (3)

Reduced to £70 as they are now gathering dust, need to get everything Scooby related shifted.

chocolate_o_brian

iTrader: (22)

Dave Y on here is after some!! Send him a pm.

NOSSY_89

I will post a direct link on that thread for you mate.