Newage exhaust system
#1
Scooby Regular
Thread Starter
iTrader: (40)
Join Date: Aug 2008
Location: Suffolk
Posts: 2,163
Likes: 0
Received 0 Likes
on
0 Posts
Newage exhaust system
I have finally made my mind up i fancy an exhaust change, I currently have a Ninja 2 back box and a de res center pipe
http://www.scoobyworld.co.uk/catalog...oducts_id=1275
http://www.scoobyworld.co.uk/catalog...roducts_id=448
I have receipts for over £300, Both parts are in excellent condition and metal polished every week,
Im looking for £200 for the lot
Here is a couple of pics
And the best I can get of centre pipe
As you can see it's pretty clean, :-)
Pick up only or can be delivered but buyer to arrange
http://www.scoobyworld.co.uk/catalog...oducts_id=1275
http://www.scoobyworld.co.uk/catalog...roducts_id=448
I have receipts for over £300, Both parts are in excellent condition and metal polished every week,
Im looking for £200 for the lot
Here is a couple of pics
And the best I can get of centre pipe
As you can see it's pretty clean, :-)
Pick up only or can be delivered but buyer to arrange
#2
Scooby Regular
iTrader: (51)
Join Date: Nov 2002
Location: MSOC
Posts: 7,439
Likes: 0
Received 0 Likes
on
0 Posts
Would you split, and if so do you know if the backbox would mate up to a milltek system? Might be up for a swap if it does, I fancy more noise where are you based?
Last edited by martin850; 02 July 2011 at 08:45 PM.
#4
Scooby Regular
iTrader: (52)
I have finally made my mind up i fancy an exhaust change, I currently have a Ninja 2 back box and a de res center pipe
http://www.scoobyworld.co.uk/catalog...oducts_id=1275
http://www.scoobyworld.co.uk/catalog...roducts_id=448
I have receipts for over £300, Both parts are in excellent condition and metal polished every week,
Im looking for £200 for the lot
Here is a couple of pics
And the best I can get of centre pipe
As you can see it's pretty clean, :-)
Pick up only or can be delivered but buyer to arrange
http://www.scoobyworld.co.uk/catalog...oducts_id=1275
http://www.scoobyworld.co.uk/catalog...roducts_id=448
I have receipts for over £300, Both parts are in excellent condition and metal polished every week,
Im looking for £200 for the lot
Here is a couple of pics
And the best I can get of centre pipe
As you can see it's pretty clean, :-)
Pick up only or can be delivered but buyer to arrange
#5
Scooby Regular
Thread Starter
iTrader: (40)
Join Date: Aug 2008
Location: Suffolk
Posts: 2,163
Likes: 0
Received 0 Likes
on
0 Posts
It will fit any scooby from 2001 - 2007, I'm based in Ipswich Suffolk,
I don't really want to split, to keep it looking like that I just use a metal polish, autosol etc
I don't really want to split, to keep it looking like that I just use a metal polish, autosol etc
Trending Topics
#14
Scooby Regular
iTrader: (51)
Join Date: Nov 2002
Location: MSOC
Posts: 7,439
Likes: 0
Received 0 Likes
on
0 Posts
Which backboxes did you try Rob?
I have been told that an H&S will fit as Anger on here has one.
I can't fit a system from the downpipe back as I also have a milltek sports cat downpipe and they are a different length to others
Looking like I might have to get the resonator cut out from my centre section to get a hit more burble. Im not even after a but spec loud just a nicer slighty louder rumble.
I have been told that an H&S will fit as Anger on here has one.
I can't fit a system from the downpipe back as I also have a milltek sports cat downpipe and they are a different length to others
Looking like I might have to get the resonator cut out from my centre section to get a hit more burble. Im not even after a but spec loud just a nicer slighty louder rumble.
#15
Scooby Regular
iTrader: (78)
Which backboxes did you try Rob?
I have been told that an H&S will fit as Anger on here has one.
I can't fit a system from the downpipe back as I also have a milltek sports cat downpipe and they are a different length to others
Looking like I might have to get the resonator cut out from my centre section to get a hit more burble. Im not even after a but spec loud just a nicer slighty louder rumble.
I have been told that an H&S will fit as Anger on here has one.
I can't fit a system from the downpipe back as I also have a milltek sports cat downpipe and they are a different length to others
Looking like I might have to get the resonator cut out from my centre section to get a hit more burble. Im not even after a but spec loud just a nicer slighty louder rumble.
I might have something of interest to you, I had a 3" pipe made up with flanges on each side to act as a spacer if that help you. I got one at 30mm for myself, and when I was trying to fit other backboxes I was so close with one that I got a 150mm spacer made, but it still failed on the back axel
edit - have you tried a japspeed?
Last edited by Rob Day; 08 July 2011 at 07:33 PM.
#16
Scooby Regular
iTrader: (51)
Join Date: Nov 2002
Location: MSOC
Posts: 7,439
Likes: 0
Received 0 Likes
on
0 Posts
Dont know which types for sure, one was definatly a good example non branded, no marking on it to say where it was made, but it was quite light and very well put together. The other was a Scoobyworld I think.
I might have something of interest to you, I had a 3" pipe made up with flanges on each side to act as a spacer if that help you. I got one at 30mm for myself, and when I was trying to fit other backboxes I was so close with one that I got a 150mm spacer made, but it still failed on the back axel
edit - have you tried a japspeed?
I might have something of interest to you, I had a 3" pipe made up with flanges on each side to act as a spacer if that help you. I got one at 30mm for myself, and when I was trying to fit other backboxes I was so close with one that I got a 150mm spacer made, but it still failed on the back axel
edit - have you tried a japspeed?
Sorry to highjack your thread Shane.
#22
Scooby Regular
iTrader: (10)
Join Date: Oct 2009
Location: Reading
Posts: 1,179
Likes: 0
Received 0 Likes
on
0 Posts
Hi Shane,
Ive got the standard centre section and a Prodrive backbox if your Ninja is still available to swap?
The centre section is off my53 wrx but only done 52k miles and the backbox is off JP4's (Jag) WR1 and has done about 20k in total iirc (15k on his car and 5k on mine.
I'll try and get under the car tomorrow and get some pics.
Is your exhaust on the car atm?
Ive got the standard centre section and a Prodrive backbox if your Ninja is still available to swap?
The centre section is off my53 wrx but only done 52k miles and the backbox is off JP4's (Jag) WR1 and has done about 20k in total iirc (15k on his car and 5k on mine.
I'll try and get under the car tomorrow and get some pics.
Is your exhaust on the car atm?
#23
Scooby Regular
iTrader: (2)
Join Date: Jul 2011
Location: Somerset
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
I am very interested in this, I have a tornado centrepipe and P1 back box and would like something louder.
I bought the centrepipe under 4 months ago and only done 2,000 miles max.
I'm in Cambridge but can come down to you one weekend.
Fingers crossed.
I bought the centrepipe under 4 months ago and only done 2,000 miles max.
I'm in Cambridge but can come down to you one weekend.
Fingers crossed.
#24
Scooby Regular
Thread Starter
iTrader: (40)
Join Date: Aug 2008
Location: Suffolk
Posts: 2,163
Likes: 0
Received 0 Likes
on
0 Posts
Hi Shane,
Ive got the standard centre section and a Prodrive backbox if your Ninja is still available to swap?
The centre section is off my53 wrx but only done 52k miles and the backbox is off JP4's (Jag) WR1 and has done about 20k in total iirc (15k on his car and 5k on mine.
I'll try and get under the car tomorrow and get some pics.
Is your exhaust on the car atm?
Ive got the standard centre section and a Prodrive backbox if your Ninja is still available to swap?
The centre section is off my53 wrx but only done 52k miles and the backbox is off JP4's (Jag) WR1 and has done about 20k in total iirc (15k on his car and 5k on mine.
I'll try and get under the car tomorrow and get some pics.
Is your exhaust on the car atm?
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM