Possible classic race car breaking
Possible classic race car breaking
**UPDATE** 23rd Jan
• CDF racing adj cam pullys £250
• Zen supplied PPG GEARBOX straight cut 1 to 4 uk 5th £1300
• Tubular stainless steel headers,rotated up-pipe,rotated down pipe,all zircotec ceramic coated black.garret GT 35 106 brand new turbo,external waste gate returning to exhaust. Was £1900 but dropped to £1800
• type r 2 pot calipers.new rear discs and godspeed mounting brk to change rear uk single rear brake set up to 2 pot larger disc set up. £180 possibly sold
• GBE 29psi boost controller £80
• team dynamics pro race race 17 inch track wheels black {home sprayed} with RE070 TYRES £200
• 3 bar map sensor £45
Engine
• 2.1 stroker allen jeffries built and supplied long motor spec as in origional post.with all belts.tentioners new.intake manifold new motorsport spark plug leads.new CDF racing blue lightweight engine pullys. SOLD
• Exedy twin plate clutch brand new £800 SOLD
• Lateral performance intercooler radiator combo with pipes. £350 SOLD
• roger clark grp n engine mount set 2 lower 1 gearbox £85 SOLD
• AST race suspention multiway adj 1 slightly sticky adj £480 SOLD
• AST ADJ TOP mount suspention £70 SOLD
• 22 rear adj sway bar £40 SOLD
• standard fit ARP head stud kit used to set motor up once £50 SOLD
• hub centric wheel spacers 20mm £75 SOLD
• P1 wheels with RE070 TYRES track wheels £120 SOLD
• Complete in boot fuel system ali tank ali swirl pot 2 fuel pumps filters and one way roll over valve.£240 SOLD
I am just gauging interest at the moment as I am thinking of striping my 1999 classic face lift race car that I have used in the castle combe saloon cup championship.car is fully built and running but not mapped yet due to new engine.
Car spec and parts for sale
Engine
Alan Jeffries built 2.1 stroker with CDB.wiesco pistons.KI-H-beam rods.New 2.5 nitrided crank overhauled uk spec heads with inconel valves.cosworth head gasket.cosworth kevlar cam belt.new cam belt tentioner.14/12 head suds.12 row oil cooler with braided lines.
** * * * Fitted with CDF racing adj campullys.CDF light weight blue anodized pulley set.also new spark plug leads.parallel fuel mod with braided lines and a sx fuel pressure regulator.
Zircotec black ceramic coated stainless steel tubular unequal length headers with rotated setup up pipe and down pipe.Garret GT35-106 turbo with external wastage that discharges back in to the exhaust.
** * *lateral performance radiator intercooler with twin fans and an external temp sensor that runs them.
** * * zenperformance supplied and fitted dry sump system with the large capacity tank in the boot with braided *lines.
** * * Fuel surge pot and twin fuel pumps with filters in boot along with aluminium foam filled tank.
** * Motec m400 ecru.air temp sensor and link adapter supplied and fitted by power station*
Usually mapped by Zenperformance.
** * *Zenperformance supplied and fitted PPG straight cut gearbox1-4 with uk 5th. Non Dccd
AST race spec suspension with AST adj top mounts.22mm sway bar and 22mm *adj front antiroll bar.
** Quick rack 2.1 lock to lock.
Godspeed supplied AP 6pot callipers 335 2 piece discs and bells DS2500 pads and a brand new set of spare discs.type r rear 2 pots with new discs and extention brk to fit uk spec 4 door.
Exedy fmo12sd twin plate clutch*
** team dynamics pro race1.2 gloss black 18x9J ET30 5x100 pcd 5.1spiggots fitted with Tarmac slicks that have done only a few heat cycles.also a spare set of slicks.
Hubcentric 20mm wheel spacers with longer studs.
Sti Ali wishbones
CDF racing drop links
CDF racing pitch mount
H2 Gt6 rear wing*
Roger Clark group n engine mounts
Roger Clark group n gearbox
Caged 6 point bolt in roll cage.
Race seat.steering wheel.6point harness
Lots I have prob forgot
Just gauging interest at the moment as I said car is built at the moment. Most of the big items are brand new with receipts. *Car is not road legal anymore.**
just a few random pics
Edited to add a few random pics
• CDF racing adj cam pullys £250
• Zen supplied PPG GEARBOX straight cut 1 to 4 uk 5th £1300
• Tubular stainless steel headers,rotated up-pipe,rotated down pipe,all zircotec ceramic coated black.garret GT 35 106 brand new turbo,external waste gate returning to exhaust. Was £1900 but dropped to £1800
• type r 2 pot calipers.new rear discs and godspeed mounting brk to change rear uk single rear brake set up to 2 pot larger disc set up. £180 possibly sold
• GBE 29psi boost controller £80
• team dynamics pro race race 17 inch track wheels black {home sprayed} with RE070 TYRES £200
• 3 bar map sensor £45
Engine
• 2.1 stroker allen jeffries built and supplied long motor spec as in origional post.with all belts.tentioners new.intake manifold new motorsport spark plug leads.new CDF racing blue lightweight engine pullys. SOLD
• Exedy twin plate clutch brand new £800 SOLD
• Lateral performance intercooler radiator combo with pipes. £350 SOLD
• roger clark grp n engine mount set 2 lower 1 gearbox £85 SOLD
• AST race suspention multiway adj 1 slightly sticky adj £480 SOLD
• AST ADJ TOP mount suspention £70 SOLD
• 22 rear adj sway bar £40 SOLD
• standard fit ARP head stud kit used to set motor up once £50 SOLD
• hub centric wheel spacers 20mm £75 SOLD
• P1 wheels with RE070 TYRES track wheels £120 SOLD
• Complete in boot fuel system ali tank ali swirl pot 2 fuel pumps filters and one way roll over valve.£240 SOLD
I am just gauging interest at the moment as I am thinking of striping my 1999 classic face lift race car that I have used in the castle combe saloon cup championship.car is fully built and running but not mapped yet due to new engine.
Car spec and parts for sale
Engine
Alan Jeffries built 2.1 stroker with CDB.wiesco pistons.KI-H-beam rods.New 2.5 nitrided crank overhauled uk spec heads with inconel valves.cosworth head gasket.cosworth kevlar cam belt.new cam belt tentioner.14/12 head suds.12 row oil cooler with braided lines.
** * * * Fitted with CDF racing adj campullys.CDF light weight blue anodized pulley set.also new spark plug leads.parallel fuel mod with braided lines and a sx fuel pressure regulator.
Zircotec black ceramic coated stainless steel tubular unequal length headers with rotated setup up pipe and down pipe.Garret GT35-106 turbo with external wastage that discharges back in to the exhaust.
** * *lateral performance radiator intercooler with twin fans and an external temp sensor that runs them.
** * * zenperformance supplied and fitted dry sump system with the large capacity tank in the boot with braided *lines.
** * * Fuel surge pot and twin fuel pumps with filters in boot along with aluminium foam filled tank.
** * Motec m400 ecru.air temp sensor and link adapter supplied and fitted by power station*
Usually mapped by Zenperformance.
** * *Zenperformance supplied and fitted PPG straight cut gearbox1-4 with uk 5th. Non Dccd
AST race spec suspension with AST adj top mounts.22mm sway bar and 22mm *adj front antiroll bar.
** Quick rack 2.1 lock to lock.
Godspeed supplied AP 6pot callipers 335 2 piece discs and bells DS2500 pads and a brand new set of spare discs.type r rear 2 pots with new discs and extention brk to fit uk spec 4 door.
Exedy fmo12sd twin plate clutch*
** team dynamics pro race1.2 gloss black 18x9J ET30 5x100 pcd 5.1spiggots fitted with Tarmac slicks that have done only a few heat cycles.also a spare set of slicks.
Hubcentric 20mm wheel spacers with longer studs.
Sti Ali wishbones
CDF racing drop links
CDF racing pitch mount
H2 Gt6 rear wing*
Roger Clark group n engine mounts
Roger Clark group n gearbox
Caged 6 point bolt in roll cage.
Race seat.steering wheel.6point harness
Lots I have prob forgot
Just gauging interest at the moment as I said car is built at the moment. Most of the big items are brand new with receipts. *Car is not road legal anymore.**
just a few random pics
Edited to add a few random pics
Last edited by PAS; Jan 23, 2011 at 10:18 PM.
Trending Topics
roll cage is made by a company called caged in uk can ship but may be exspensive to send.
this cage has weld in plates that the cage then bolts to.new plates can be got from caged.
this cage has weld in plates that the cage then bolts to.new plates can be got from caged.
