Syvecs S6GP and custom loom
#1
Syvecs S6GP and custom loom
I have decided to sell my Syvecs S6GP ECU with uprated active knock control. I will also be selling my custom lightweight motorsport loom. This was made from scratch using new connectors and pins and lightweight Raychem wire and heatshrink. This is not a cheap hack it and solder together affair this is a proper loom. The loom is pinned for 2.5 single AVCS heads but I can easily convert to 2.0Lt AVCS heads if required.
£2450 plus delivery
I also have a full sensor pack that I can sell which would include oil and fuel pressure sensors, water temp, water pressure, 4 bar map sensor, wideband lambda, inlet air temp, knock and crank sensors. These would be in addition and by negotiation.
I will also be selling my Aim MXL Strada dash and the control panel I had in the car which would come with a full MOT compliant car loom.
£2450 plus delivery
I also have a full sensor pack that I can sell which would include oil and fuel pressure sensors, water temp, water pressure, 4 bar map sensor, wideband lambda, inlet air temp, knock and crank sensors. These would be in addition and by negotiation.
I will also be selling my Aim MXL Strada dash and the control panel I had in the car which would come with a full MOT compliant car loom.
Last edited by Arch; 23 February 2018 at 04:33 PM.
#2
Scooby Regular
I have been looking into getting all of this for my 2003 Sti 2.0
What would be involved in fitting ?
Is it the S6 pnp ?
i know it will need mapped etc but is there anything that would need bought as well ?
What would be involved in fitting ?
Is it the S6 pnp ?
i know it will need mapped etc but is there anything that would need bought as well ?
#3
This is the GP model which needs a custom loom like the one I am selling. The advantage it has it can be configured to what ever you want not stuck with the parametres of the standard car. If you want a plug and play ECU you would need to but the correct one for your year of car.
#5
Scooby Regular
I have decided to sell my Syvecs S6GP ECU with uprated active knock control. I will also be selling my custom lightweight motorsport loom. This was made from scratch using new connectors and pins and lightweight Raychem wire and heatshrink. This is not a cheap hack it and solder together affair this is a proper loom. The loom is pinned for 2.5 single AVCS heads but I can easily convert to 2.0Lt AVCS heads if required.
£2450 plus delivery
I also have a full sensor pack that I can sell which would include oil and fuel pressure sensors, water temp, water pressure, 4 bar map sensor, wideband lambda, inlet air temp, knock and crank sensors. These would be in addition and by negotiation.
I will also be selling my Aim MXL Strada dash and the control panel I had in the car which would come with a full MOT compliant car loom.
£2450 plus delivery
I also have a full sensor pack that I can sell which would include oil and fuel pressure sensors, water temp, water pressure, 4 bar map sensor, wideband lambda, inlet air temp, knock and crank sensors. These would be in addition and by negotiation.
I will also be selling my Aim MXL Strada dash and the control panel I had in the car which would come with a full MOT compliant car loom.
Can u explain it ?
Cant see this hanging around
I wont be doing mine till summer earliest
#7
I probably used the wrong terminology, the actual term I believe is full knock control. It is a firmware upgrade that essentially allows more mapping options for the control of knock and is far better than the standard knock control.
There is someone interested in the ECU and loom tho
There is someone interested in the ECU and loom tho
Last edited by Arch; 24 February 2018 at 11:34 PM.
Thread
Thread Starter
Forum
Replies
Last Post