Lots of nice parts. Wheels, exhaust, subframes
09 July 2017, 08:36 PM
#1
Lots of nice parts. Wheels, exhaust, subframes
Hi guys, so here I have quite a few nice parts removed from my ra
All prices are plus postage.
The only items I'm looking to post is the gearbox mount and diff mount. All other items are for collection due to size and weight thanks
Subframes and cradles powder coated, these were fitted to my ra when I restored it. Really tidied up the underside of the car. modified to keep the transmission nice and solid
Here we have new age rear subframe (fits classic, was on mine) complete with proper bespoke solid mounting bushes.
In addition there is a proper solid diff mount. This little lot locks the rear end down solid. All fully finished, powder coated gloss black. Very good condition, couple of chips here and there £220
Rear T bar, complete with fresh bushes, fully powder coated gloss black, again there is the odd chip. But very good condition £80
Gearbox cradle, fully powder coated gloss black, again there is the odd chip. But very good condition. Rubber isolator pads removed and shimmed with steel washers to make it all solid £60
Oem 6speed diff mount, powder coated black. Has a few chips on the side, as pictured. Fitted with super updated mounting bushes. £40 plus postage
Cusco, uprated 6speed gearbox mount.
Excellent condition
£50 plus postage
Revolution exhaust system,had this on my classic but also fits newage, true 3" cat back. Regarded as one of the best exhausts for the Subaru. Passes all noise tests at track days. Very unobtrusive and not overly loud, however open it up and it sounds great. These are know to make excellent power and are regularly used up to 700bhp.
I didn't like the tailpipe, so we modified it and fitted a downward facing droop snoop. Very motorsport looking. Looked amazing on my RA. There is a couple of marks underneath from the old tailpipe, this cannot be seen just been honest
£300
Super Rare JDM lightweight forged wheels
These are my SSR type C wheels, 17x8 et30 they are 5x114 so suitable for all widetracks.
Proper lightweight competition wheels these, weighing in at 6.8kg each. A team dynamic or Rota of the same size is about 10.5kg each and probably not as strong due to these being forged. That's a huge weight saving and an excellent place to save it due to being in sprung and rotational.
I bought these then decided to stay 5x100 so luckily got another set and did them bronze (see pic)
2of them have been refurbished by the previous owner, the other could probably benefit from one.
Price is £700 for some proper lightweight wheel.
All prices are plus postage.
The only items I'm looking to post is the gearbox mount and diff mount. All other items are for collection due to size and weight thanks
Subframes and cradles powder coated, these were fitted to my ra when I restored it. Really tidied up the underside of the car. modified to keep the transmission nice and solid
Here we have new age rear subframe (fits classic, was on mine) complete with proper bespoke solid mounting bushes.
In addition there is a proper solid diff mount. This little lot locks the rear end down solid. All fully finished, powder coated gloss black. Very good condition, couple of chips here and there £220
Rear T bar, complete with fresh bushes, fully powder coated gloss black, again there is the odd chip. But very good condition £80
Gearbox cradle, fully powder coated gloss black, again there is the odd chip. But very good condition. Rubber isolator pads removed and shimmed with steel washers to make it all solid £60
Oem 6speed diff mount, powder coated black. Has a few chips on the side, as pictured. Fitted with super updated mounting bushes. £40 plus postage
Cusco, uprated 6speed gearbox mount.
Excellent condition
£50 plus postage
Revolution exhaust system,had this on my classic but also fits newage, true 3" cat back. Regarded as one of the best exhausts for the Subaru. Passes all noise tests at track days. Very unobtrusive and not overly loud, however open it up and it sounds great. These are know to make excellent power and are regularly used up to 700bhp.
I didn't like the tailpipe, so we modified it and fitted a downward facing droop snoop. Very motorsport looking. Looked amazing on my RA. There is a couple of marks underneath from the old tailpipe, this cannot be seen just been honest
£300
Super Rare JDM lightweight forged wheels
These are my SSR type C wheels, 17x8 et30 they are 5x114 so suitable for all widetracks.
Proper lightweight competition wheels these, weighing in at 6.8kg each. A team dynamic or Rota of the same size is about 10.5kg each and probably not as strong due to these being forged. That's a huge weight saving and an excellent place to save it due to being in sprung and rotational.
I bought these then decided to stay 5x100 so luckily got another set and did them bronze (see pic)
2of them have been refurbished by the previous owner, the other could probably benefit from one.
Price is £700 for some proper lightweight wheel.
