SOLD
18 February 2016, 07:23 PM
#1
SOLD
up for sale is my esl ecu removed from my 1997 impreza sti, im fitting avcs heads now and unfortunately will need another ecu to run them
its for v3/4 cars, the board is fitted to a jdm 6s sti ecu, will work fine in a uk car too, you just need to swap the cam and crank sensor ecu pins,
it has the motorsports pack which includes launch control, anti lag, full throttle shift and traction control, please see the esl manual for more info on how these work and how to wire in switches.
it will be supplied with a standard 6s sti basemap to get you running, or if needed i can load a maffless basemap, your choice.
the tuning cable is the obd type so make sure its the correct one for your car
ecu is £380 posted
cable is £75 posted
buyer to cover any fee's if using paypal
collection from leicester welcome
its for v3/4 cars, the board is fitted to a jdm 6s sti ecu, will work fine in a uk car too, you just need to swap the cam and crank sensor ecu pins,
it has the motorsports pack which includes launch control, anti lag, full throttle shift and traction control, please see the esl manual for more info on how these work and how to wire in switches.
it will be supplied with a standard 6s sti basemap to get you running, or if needed i can load a maffless basemap, your choice.
the tuning cable is the obd type so make sure its the correct one for your car
ecu is £380 posted
cable is £75 posted
buyer to cover any fee's if using paypal
collection from leicester welcome
Last edited by sean turbo2000; 21 February 2016 at 12:39 PM.
20 February 2016, 07:58 PM
#3
Scooby Regular
iTrader: (7)
Join Date: Mar 2013
Location: Belfast
Posts: 2,999
Likes: 0
Received 0 Likes
on
0 Posts
Maybe a bit dear mate, the whole new kit isn't a huge amount more than that really. Is that the correct cable? I have the same setup but my car has SSM rather than OBD.
20 February 2016, 08:42 PM
#5
Scooby Regular
iTrader: (7)
Join Date: Mar 2013
Location: Belfast
Posts: 2,999
Likes: 0
Received 0 Likes
on
0 Posts
I bought the whole heap new myself too along with the motorsports pack too. Great kit! Weird how Subaru chopped and changed between SSM and OBD! Best of luck with the sale.
21 February 2016, 07:32 AM
#7
Scooby Regular
iTrader: (1)
Join Date: Dec 2012
Location: east sussex
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Ive got a uk 98 reg car with 8s ecu so would need to switch the pins for crank and cam over in the ecu plug i take it? What about fuel pump thought that had to be swapped?. I know the basemap would be different to the uk car as heads etc are different but my car is running loads of non standard items bigger injectors etc so take it just a case of remapping to suit.
Whats the best you can do price wise can pm if you want.
Trending Topics
21 February 2016, 11:00 AM
#8
Scooby Regular
iTrader: (7)
Join Date: Mar 2013
Location: Belfast
Posts: 2,999
Likes: 0
Received 0 Likes
on
0 Posts
If you do buy this I'll send you the 8S base map and the software. Both readily available from ESL themselves too.
And yes, you'll need to remap the ECU to your own spec for whatever mods you have. There's loads of threads active at the minute about doing just that, injector scaling and so on.
And yes, you'll need to remap the ECU to your own spec for whatever mods you have. There's loads of threads active at the minute about doing just that, injector scaling and so on.
Last edited by piehole1983; 21 February 2016 at 11:01 AM.
Thread
Thread Starter
Forum
Replies
Last Post