When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Subaru uprated rear diff support brace v3/4 fittment
A rear diff support bracket for a classic Subaru v3/4.
I fabricated one of these for myself and ended up knocking up a few more as I made a jig and had some materials left.
This is a great cost effective mod, it takes the job out of the standard rubber diff bushes and bolts it solid to the subframe removing the sloppiness and increasing throttle response.
Works a treat on my 320bhp Subaru sti powered Peugeot 205.
This will slightly increase NVH although I can't notice it on my car as it's loud as hell anyway.
£58 delivered.
All the nuts,bolts and washers included.
Cheers James
Last edited by rentonone; Mar 22, 2016 at 05:53 PM.
Sorry for the dumb questions but,how easy are these to fit,and would this fit my v3 which has had a 6 speed conversion?
Cheers
Rich
Hi mate, yes as Joe says it's easy to fit, just remove the two stock diff mount nuts, fit the new brace and re fit the nuts plus the two extra nuts and bolts to secure it solid to the subframe.
No drilling required as it uses the holes that are already in the subframe.
Hi mate, yes as Joe says it's easy to fit, just remove the two stock diff mount nuts, fit the new brace and re fit the nuts plus the two extra nuts and bolts to secure it solid to the subframe.
No drilling required as it uses the holes that are already in the subframe.
James
Cool,sounds like a good mod for little money
PayPal ok? Pm me you details and I will send money tonight.
Yea I have seems to have tightened the drivetrain up but very hard to tell on mine PPG box carbon shaft and most of the bushings already done so just an experiment really.
Subaru uprated rear diff support brace v3/4 fittment
