Subaru uprated rear diff support brace v3/4 fittment
1 Attachment(s)
Attachment 38268https://cimg0.ibsrv.net/gimg/www.sco...113bc482bf.jpg
https://cimg7.ibsrv.net/gimg/www.sco...8a452201d7.jpg A rear diff support bracket for a classic Subaru v3/4. I fabricated one of these for myself and ended up knocking up a few more as I made a jig and had some materials left. This is a great cost effective mod, it takes the job out of the standard rubber diff bushes and bolts it solid to the subframe removing the sloppiness and increasing throttle response. Works a treat on my 320bhp Subaru sti powered Peugeot 205. This will slightly increase NVH although I can't notice it on my car as it's loud as hell anyway. :norty: £58 delivered. All the nuts,bolts and washers included. Cheers James |
£58 delivered? This has to be bargain guys!
considering these are about £150 from beatrush. |
Go ahead fella i'll be your guinea pig lol PM me your details. :)
|
Originally Posted by 1509joe
(Post 11789588)
Go ahead fella i'll be your guinea pig lol PM me your details. :)
PM sent :thumb: |
Payment sent. :thumb:
|
Originally Posted by 1509joe
(Post 11789809)
Payment sent. :thumb:
|
Sorry for the dumb questions but,how easy are these to fit,and would this fit my v3 which has had a 6 speed conversion?
Cheers Rich |
Very east to fit and yes will fit. 20mins on a lift.
|
Originally Posted by 1509joe
(Post 11789841)
Very east to fit and yes will fit. 20mins on a lift.
Can you pm me payment details cheers. |
Originally Posted by ossett2k2
(Post 11789840)
Sorry for the dumb questions but,how easy are these to fit,and would this fit my v3 which has had a 6 speed conversion?
Cheers Rich No drilling required as it uses the holes that are already in the subframe. James |
Originally Posted by rentonone
(Post 11789853)
Hi mate, yes as Joe says it's easy to fit, just remove the two stock diff mount nuts, fit the new brace and re fit the nuts plus the two extra nuts and bolts to secure it solid to the subframe.
No drilling required as it uses the holes that are already in the subframe. James PayPal ok? Pm me you details and I will send money tonight. |
Payment sent
Cheers James :thumb: |
Originally Posted by ossett2k2
(Post 11789892)
Payment sent
Cheers James :thumb: |
Received James thanks. Looks to be a good cheap mod i'll put it on later. Will keep you updated. Bit of a bump for you.
|
Originally Posted by 1509joe
(Post 11790970)
Received James thanks. Looks to be a good cheap mod i'll put it on later. Will keep you updated. Bit of a bump for you.
|
All fitted good cheap mod fitted in 5mins :thumb:
|
Originally Posted by 1509joe
(Post 11791810)
All fitted good cheap mod fitted in 5mins :thumb:
Have you noticed much difference? |
Yea I have seems to have tightened the drivetrain up but very hard to tell on mine PPG box carbon shaft and most of the bushings already done so just an experiment really.
|
Received today,thanks :thumb:
|
Cheers guys! :thumb:
|
I still have a few of these left guys if anyone wants one.
Etch primed and coated in durable 2 pac paint. The last few are in Subaru wrx blue. £58 delivered Thanks. |
You have pm.
|
Our kid want to know if it will for his newage STI?
|
Originally Posted by joe v3sti
(Post 11805460)
Our kid want to know if it will for his newage STI?
James |
Originally Posted by Mperregil
(Post 11805383)
You have pm.
Replied mate cheers! |
Bump
|
Bump
|
I'll take one
pm me your info |
paid ;-)
|
I'm in..PM sent
|
All times are GMT +1. The time now is 12:30 AM. |
© 2024 MH Sub I, LLC dba Internet Brands