solid-fabrications 3" turbo back exhuast/downpipe
#1
Scooby Regular
Thread Starter
Join Date: Oct 2014
Location: england
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
solid-fabrications 3" turbo back exhuast/downpipe
TRUE 3" impreza exhaust and downpipe please note this is not ebay or powerflow Chinese exhaust junk this is made in the uk by solid fabrications ( if you dont know you should) and cost 900 pounds when new. Only donw 1000 miles on my car now car is being broken
made of 1.6mm stainless steel with a triple skinned flexi joint and a brace pre flexi onto the gearbox true 3" 76.3 mm mandrel bent and tig welded
this exhaust is well under 98db at 4k and is smooth through the rev range.
tons of ground clearance made on the car so fits properly not a off the shelf item
will fit td04/td05 turbos anything stock frame
£550 ono
TRUE 3" impreza exhaust and downpipe please note this is not ebay or powerflow Chinese exhaust junk this is made in the uk by solid fabrications ( if you dont know you should) and cost 900 pounds when new. Only donw 1000 miles on my car now car is being broken
made of 1.6mm stainless steel with a triple skinned flexi joint and a brace pre flexi onto the gearbox true 3" 76.3 mm mandrel bent and tig welded
this exhaust is well under 98db at 4k and is smooth through the rev range.
tons of ground clearance made on the car so fits properly not a off the shelf item
will fit td04/td05 turbos anything stock frame
made of 1.6mm stainless steel with a triple skinned flexi joint and a brace pre flexi onto the gearbox true 3" 76.3 mm mandrel bent and tig welded
this exhaust is well under 98db at 4k and is smooth through the rev range.
tons of ground clearance made on the car so fits properly not a off the shelf item
will fit td04/td05 turbos anything stock frame
£550 ono
TRUE 3" impreza exhaust and downpipe please note this is not ebay or powerflow Chinese exhaust junk this is made in the uk by solid fabrications ( if you dont know you should) and cost 900 pounds when new. Only donw 1000 miles on my car now car is being broken
made of 1.6mm stainless steel with a triple skinned flexi joint and a brace pre flexi onto the gearbox true 3" 76.3 mm mandrel bent and tig welded
this exhaust is well under 98db at 4k and is smooth through the rev range.
tons of ground clearance made on the car so fits properly not a off the shelf item
will fit td04/td05 turbos anything stock frame
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
ATWRX
Full Cars Breaking For Spares
88
01 February 2016 07:28 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM