swap
#1
Scooby Regular
Thread Starter
iTrader: (12)
Join Date: Sep 2004
Location: colchester
Posts: 7,226
Likes: 0
Received 0 Likes
on
0 Posts
swap
right I want to swap my v6 sti type r limited for a jdm blob in white
or any colour really
here's the spec
MDx321h Turbo,
Alcatec ecu ( mapped by bob Rawls to 400bhp)
MILLTEK 2.5" Straight Through Exhaust System with Milltek High Flow DeCat Downpipe
740cc Lateral Flowed Injectors
HYBRID Front Mount Intercooler
HKS Induction Kit
ported headers and up pipe
front brembo calipers and discs (new), with new pads
rear brembo calipers and discs (new), with new pads
uprated anti judder clutch (excidy pink)
standard sti suspension (fully rebuilt)
17" invoit with nearly new eagel f1 tyres
all mods less than 3k old
the engine has been rebuilt using standard parts but in a closed deck block, it's also had a new head gasket , seals etc etc
the car runs very well and I really can't fault it one bit
it's showing 27k on the clock , but this is due to clock change , due to prev owner trying to replace a bulb and braking the old ones (took him months to find a set as limited ones are with a blue surround and cost him a few £££ too)
the mileage on the car is around 64k that's when you convert the km and miles together ( iv got the prev owners phone number who can verify all this )
don't really want to get rid but really want a jdm blob in white ( if poss)
don't want to put a price on this as really want a swap
can take more pics on request
stu
or any colour really
here's the spec
MDx321h Turbo,
Alcatec ecu ( mapped by bob Rawls to 400bhp)
MILLTEK 2.5" Straight Through Exhaust System with Milltek High Flow DeCat Downpipe
740cc Lateral Flowed Injectors
HYBRID Front Mount Intercooler
HKS Induction Kit
ported headers and up pipe
front brembo calipers and discs (new), with new pads
rear brembo calipers and discs (new), with new pads
uprated anti judder clutch (excidy pink)
standard sti suspension (fully rebuilt)
17" invoit with nearly new eagel f1 tyres
all mods less than 3k old
the engine has been rebuilt using standard parts but in a closed deck block, it's also had a new head gasket , seals etc etc
the car runs very well and I really can't fault it one bit
it's showing 27k on the clock , but this is due to clock change , due to prev owner trying to replace a bulb and braking the old ones (took him months to find a set as limited ones are with a blue surround and cost him a few £££ too)
the mileage on the car is around 64k that's when you convert the km and miles together ( iv got the prev owners phone number who can verify all this )
don't really want to get rid but really want a jdm blob in white ( if poss)
don't want to put a price on this as really want a swap
can take more pics on request
stu
Last edited by stuart148; 24 January 2014 at 07:13 PM.
#3
Scooby Regular
Join Date: Nov 2007
Location: solihull
Posts: 940
Likes: 0
Received 0 Likes
on
0 Posts
Car
Hi mate,i know your after a swap but may be interested if you ever want to sell.who did the rebuild mate and was it yourself who had it done ? Thanks,carl.
#4
Scooby Regular
Thread Starter
iTrader: (12)
Join Date: Sep 2004
Location: colchester
Posts: 7,226
Likes: 0
Received 0 Likes
on
0 Posts
hi mate it was the pre owner that had it done , but he used a closed deck block but just standard pistons and rods ( but forged sti ones any way)
new timing belt, and seals etc etc
he then spent around 8k on mods
and they was on 1200 miles then I bought the car
all the mods have only been on around 3k
if you want to buy it for cash pm me what your willing to pay and I'll see
stu
new timing belt, and seals etc etc
he then spent around 8k on mods
and they was on 1200 miles then I bought the car
all the mods have only been on around 3k
if you want to buy it for cash pm me what your willing to pay and I'll see
stu
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
crazyspeedfreakz
Wanted
17
05 October 2015 07:19 PM
M4RKG
General Technical
3
30 September 2015 07:51 PM