Hi just bought a fmic for my blob sti.
Has anyone got any stencils for them or any pictures of what they've done?
Thanks
Ryan

 

Up

 

Bump

 

I have a prodrive stencil I done recently for my tmic yet to put on my front mount but all you need to do is follow the steps to a .arger scale surely depending on what you want on it ?

I chose not to spray directly on to my intercooler so instead I sourced a bit black mesh and cut it to size with the intention of sticking to right Angeled pieces of metal along each side hiding the hideous rough edges and a plain 1cm thick strip to do the same at the bottom allowing me to take of nice and easy If I ever needed to + sits over the top so stops fins getting bent when you smash a bee at 130mph+ lol I'll post a few links here for you showing you how easy it really was.


I used this exact picture
http://i801.photobucket.com/albums/y...ivestencil.jpg

Simply zoomed in on it on the iPad , lay a piece of paper over the top and lightly traced it , then cut it out leaving me with a ****ty paper stencil , then used that over a piece of card giving more stability , then cut that out leaving me a harder stencil , then lay that over the top of sticky backed plastic (bought from b&q for 1.50 a meter2 ,
Drew it all up cut it out then placed over the piece of mesh , sprayed it 3 or 4 times with my choice of couloir (aluminium spray And unique personally desinged pink) and it came out really really good just need to solder the wire on the the blanking strips or glue or weld or whatever lol here's the links to the steps , I appolagise for this ring so long sometimes I go off on one and this has been one of them occasions

Step one - http://s1305.beta.photobucket.com/us...tml?sort=3&o=6

Step 2- http://s1305.beta.photobucket.com/us...tml?sort=3&o=5

Step 3- http://s1305.beta.photobucket.com/us...tml?sort=3&o=4. ( make sure it's thourally stuck down and flows over each individual fin if doing directly on to fmic for best results + plenty masking tape)

Step 4- http://s1305.beta.photobucket.com/us...tml?sort=3&o=3
http://s1305.beta.photobucket.com/us...tml?sort=3&o=2

Step 5 ( the pink line ) -

http://s1305.beta.photobucket.com/us...tml?sort=3&o=1

Step 6- final result (pink looks better looking directly from above , the sun in this photo does it no justice )
http://s1305.beta.photobucket.com/us...tml?sort=3&o=0


Hope this helped , any questions do feel free to get in touch , I done this with little back round knowlage on the subject and I failed art in school so it really is nice and easy ! I still have plent sticky plastic if you need some but I'd require you to cover postage? "Imprezive"