Door Handle Removal?
12 September 2007, 08:36 PM
#2
Remove door card: screw under cover at front, another in the pull handle. Release clips along base and front, lift card and pull towards you.
Lever up window switch from rear, and unclip wiring.
Unclip surround to inside handle, it's on four clips, they pull outwards.
Pull polythene sheet away from glue at top corner, undo two nuts behind dooor handle.
Release latching mechanism: plastic clip, coloured green fastened onto pull rod, on mine. Door handle now comes away from outside. DON'T lose that plastic clip.
Don't forget to use a plastic primer, and don't colour code the soft plastic base plate, the paint doesn't take on it.
Alcazar
Lever up window switch from rear, and unclip wiring.
Unclip surround to inside handle, it's on four clips, they pull outwards.
Pull polythene sheet away from glue at top corner, undo two nuts behind dooor handle.
Release latching mechanism: plastic clip, coloured green fastened onto pull rod, on mine. Door handle now comes away from outside. DON'T lose that plastic clip.
Don't forget to use a plastic primer, and don't colour code the soft plastic base plate, the paint doesn't take on it.
Alcazar
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM