How do i fit a p1 splitter
#1
Scooby Regular
Thread Starter
Join Date: Oct 2005
Location: Worcester
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
How do i fit a p1 splitter
Hi a bought a p1 splitter of ebay and just wondered how to fit it? ive put it on but need to know how to bolt it on? i took the tow eye cover off but cant put it back on because the tow hook is in the way so do i need to take the tow hook off? second of all i had 4 bolts with it but havent got any holes to screw it into. my car is a 2000 sport. would be very gratefull if someone could post a fitting guide or give me some help. thanks guys
Craig
Craig
#2
Scooby Regular
iTrader: (2)
Join Date: Mar 2001
Location: Here and there
Posts: 8,353
Likes: 0
Received 0 Likes
on
0 Posts
If its a replica P1 splitter it should be screwed into each side of the bumper,you will have to drill 2 small holes in the bumper and there should be what i can only describe as a top cover on the splitter which fixes over the bottom of the existing bumper if you see what i mean then that is bonded to the bumper using a good bonding adhesive
as you can see from the above pic the splitter also fixes above the bottom of the bumper
i hope this makes some sort of sense to you as ive confused myself now
as you can see from the above pic the splitter also fixes above the bottom of the bumper
i hope this makes some sort of sense to you as ive confused myself now
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
JonMc
Subaru Parts
22
06 February 2016 09:50 PM