bpm1588

hi i have just bought an o4 wrx,can i fit the sti fog light covers and the splitters that are fitted either side of the bumpers?
cheers barry

ethanrob

iTrader: (3)

yo can fit the fog covers mate,but you will have to remove your fog lamps and surrounds
also the end sections of the sti bumper will not fit unless you buy a sti front bumper

places like mro/dr motorsports do front splitters for the wrx with end extensions on to give it that sti look

bpm1588

cheers mate for the answer,i guess i'll check out those splitters and see what happens

powerman1

The front splitters do fit cos ive fitted them to my WRX03.You will have to drill two slots on either side of the bumper to align up with the pegs on the side overlays and take off the insert pegs that are down the middle of the overlays/splitter.Its difficult to explain but i am no expert but it took me about 1 hour to do both sides.I am only refering to the end overlays that sweep round to the front as fitted as standard to the STI and can be bought from a Subaru dealer for about £126inc for the pair ready painted..P.S you will need a few extra push in pegs to fix it along the bottom and wheel arch edge powerman

bpm1588

thanks power man,i'll be on the blower in the morn to the dealer,i know i have'nt an sti but those overlays do really look good and maby make my new wrx a bit more individual,you have'nt a pic of your scoob by any chance?

thanks barry

ethanrob

iTrader: (3)

sorry mate
must have been mistaken,anyway after you have fitted the sti ends
check out www.scottlowe.co.uk for a seriously cool front lip spoiler

powerman1

have got some pics but dont know how to get it on ere

ethanrob

iTrader: (3)

email me a couple mate and i will stick em up for ya

Allan

iTrader: (1)

Hi Barry, let us know how you get on, am thinking of doing the same.

Allan

powerman1

on their way now

bpm1588

no problem as soon as i get them fitted i'll post a few pic's,those splitters at scott lowe look really well as another addition as well,
barry

richiewong

http://bbs.scoobynet.co.uk/showthread.php?t=404350

DJ Dunk

iTrader: (5)

Here's my WRX, with the same sort of STi Mods Genuine scoop from RavSpec in the USA (cheaper than Subaru UK ), Genuine side splitters and foglight covers plus DR Motorsport Grille.

Allan

iTrader: (1)

Thanks for the link, hadn't seen that thread before.

Allan

Squadron-Leader

Here's my 04 Wagon with STI fog covers and Scott Lowe lip...and 25mm lower due to Prodrive springs.



J.

Foot_Tapper

Was thinking about making some of the fog covers in CF, anyone got a set they could lend. pwetty please

DJ73

think you can already get them from the state's , some link on awhile back

Spec'c'57

iTrader: (1)

how long would you need the covers for?????

DJ73

you'd be better off with c/f "look" sticker sheet

Foot_Tapper

Would have to check with my brother, prolly a couple of weeks so he could make moulds. ( he did a couple of sets of old sti style ones for me)


Yea DJ have seen them on some sites in the states, about £95 a set from what have seen.
Have also seen some kevlar fabric that has different colour in the weave.. red, blue, yellow, green blah blah...that would prolly look good

here's a pic I found from a nasioc group buy

DJ73

yes that's the one's , when it was posted awhile back no one was too impressed as there was an issue with the weave on the tight corner's etc

Foot_Tapper

I have heard there being problems with CF on tight angles an stuff, spose it could depend on the weave/thickness of cloth.
My brothers a fabricator in all sorts of materials inc FG, CF, Kevlar etc, i'll ask him !!

DJ73

think the place that's making these would have taken all that into consideration (weave/thickness of cloth ) but nobody seemed to like these done in c/f when it was first posted