Anyone know of an STi7 style bonnet scoop for an MY99
30 September 2002, 01:32 PM
#4
Scooby Regular
Join Date: May 2002
Posts: 1,653
Likes: 0
Received 0 Likes
on
0 Posts
Just spoke with TSL.
The larger STI 7 scoop doesn't fit classic Scoobs.
Also, they said that if the scoop was any larger, then air flow could possibly direct airflow over the IC rather than into it.
The larger STI 7 scoop doesn't fit classic Scoobs.
Also, they said that if the scoop was any larger, then air flow could possibly direct airflow over the IC rather than into it.
30 September 2002, 03:57 PM
#6
Scooby Regular
30 September 2002, 08:09 PM
#7
Scooby Regular
Join Date: May 2001
Location: Scotland
Posts: 4,580
Likes: 0
Received 0 Likes
on
0 Posts
This echoe's come back with a link 
http://freespace.virgin.net/michael....4/splitter.htm
Good ol' search
http://freespace.virgin.net/michael....4/splitter.htm
Good ol' search
Trending Topics
04 October 2002, 12:35 PM
#9
Scooby Regular
I borrowed a std WRX scoop and trial fitted it to a MY97. (A WRX scoop will have the same fixings as an STI7 scoop)
It does sort of fit
but leaves gaps at the front corners and would need triming at the rear corners to fit flush!
Some of the bolts/clips line up with a bit of adjustment
I'll try it again later and this time I'll remember the digi cam!!!!
Iain.
)It does sort of fit
but leaves gaps at the front corners and would need triming at the rear corners to fit flush! Some of the bolts/clips line up with a bit of adjustment
I'll try it again later and this time I'll remember the digi cam!!!!
Iain.
by the way
08 October 2002, 12:02 PM
#11
Scooby Regular
Heres the pics (finally!)
This is a MY02 WRX scoop (same base size as STI7 scoop).
As you can see the front corners are too shallow and the rears too tight and would need trimming.
A few of the mounting holes line up but not enough for a direct fit.
Iain.
This is a MY02 WRX scoop (same base size as STI7 scoop).
As you can see the front corners are too shallow and the rears too tight and would need trimming.
A few of the mounting holes line up but not enough for a direct fit.
Iain.
09 October 2002, 08:49 AM
#13
Scooby Regular
Join Date: Oct 2001
Posts: 1,833
Likes: 0
Received 0 Likes
on
0 Posts
I am also inerested about this Iain, keep us informed.
It would be nice if MRO could support an upgrade for the standard bonnet scoop as all the pre MY01 cars suffer from air flow through the I/C. I listened that the scoop you try makes things worse, I don't know why, but if I remember right the source was TSL Performance!
Cheers
JIM
It would be nice if MRO could support an upgrade for the standard bonnet scoop as all the pre MY01 cars suffer from air flow through the I/C. I listened that the scoop you try makes things worse, I don't know why, but if I remember right the source was TSL Performance!
Cheers
JIM
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM
supshon
General Technical
2
03 October 2015 08:06 PM