When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Morning guys, the front STI splitter/valance on my Legacy TbSTI has lost countless bouts against speed bumps and as such is showing multiple cracks and tears.
I've had a quick search of the forums to see if anyone has attempted repairing one themselves with readily available products, to no immediate luck.
An example of the damage.
I'm looking to see if anyone has and if it's cheaper than the £300odd it would cost to replace with OEM from Nengun Performance. I would also like to know how difficult it would be for a guy that's not familiar with body repair.
I've fixed similar before. You can get fiberglass repair kits that are easy to use (halfords) I fiberglassed behind the crack as its messy then just used isopon filler on the face to smooth out the crack. Then satin black paint the whole thing.
Mine wasn't perfect but couldn't be bothered giving it another go for all u could see.
Last edited by CharlySkunkWeed; 25 July 2021 at 11:37 AM.
Brilliant mate thank you so much, can you recommend what grit sandpaper you used to smooth it down before priming/painting?
I can't remember to be honest, maybe 1200 ? Like "wet and dry" type stuff.
Forgot to mention above that I used etch primer before paint, after 2 or 3 coats of it the 1200grit leaves it very smooth for the satin black top coats
Add some aluminium mesh into the rear too to help with the rigidity of the join. I've also used aluminium strip that's been heavily scuffed with a coarse flap disc on the grinder too (helps the fibreglass resin to adhere to it).
25 July 2021, 10:15 AM
STI Front Splitter Repair?
