Classic rally/track build
#61
Scooby Regular
Thread Starter
yes same ones as on eBay ,,,,gussy would be a better person to ask about weather they whistle as my car hasn't moved yet lol ,not sure they would be a good idea on a every day car as there isn't a seal as such , happy with the quality though
#62
Scooby Regular
Thread Starter
engine bay is more or less there now just a bit of tidying to do , its now running again but still need to do one or two more bits of wiring before all the seats and stuff go back in and then it still needs mapping for the alkatec ,, also fitted boost oil pressure and temp gauges
#65
Scooby Regular
Thread Starter
starting to get there now ,, been finishing off the bits of wrring inside for everything as with the loom being stripped iv had to wire all the extras in from scratch and I'm not great with wires so have had to take my time a bit
still waiting on the spoiler to be sprayed and iv got another front bumper for it as I'm not happy with the fit of the current one
need to fit the mud flaps and check everything is tight and I think thats about it then until mapping and wheel alignment
once its out of the garage in the daylight ill get some pics up
still waiting on the spoiler to be sprayed and iv got another front bumper for it as I'm not happy with the fit of the current one
need to fit the mud flaps and check everything is tight and I think thats about it then until mapping and wheel alignment
once its out of the garage in the daylight ill get some pics up
#66
Scooby Regular
Thread Starter
still waiting on the new bumper and spoiler to get here but its more or less ready ,oh and need to fit my harnesses, should be ready for a MOT next week and then ill book mapping for the alcatek
#69
Scooby Regular
Thread Starter
still doing a few bits to it as I'm not completely happy with the spec so upgrading some stuff,,, but got it out in the daylight for the first time the other day and got to say it looks very nice ,, since the pics the new bumper is fitted and spoiler is on but still not happy with the spoiler so will be getting a different one done I think lol
#70
Scooby Regular
Thread Starter
this is now complete and ready for sale , will be going up for sale properly in mid jan once I'm back from holiday,, but happy to talk to anyone interested in it now and go over any details
#72
Scooby Regular
Thread Starter
iv got another cashmere yellow STI I'm sorting out to sell next year some time aswell but thats staying as a standard car this time lol
#73
Scooby Regular
Thread Starter
here is the current spec in case anyone doesn't want to look though the posts
Shell prep
shell has been fully stripped bare and all sound deadening removed
extra plating added to the front turrets for more strength
front panel was cut off and made stronger and lighter
tunnels welded into the front of the chassis legs to allow for the front mount piping to have a shorter and safer run under the headlights
full weld in roll cage ,including dash bar and though to the turrets roof bars and seat bars
sill stand holes welded in
fully welded in place parcel shelf
lots of tags have also been added around the car to allow the loom and other bits to be secured safely and neatly
rear arches have been rolled and flared for extra room
interior sprayed silver
outside and engine bay sprayed Skoda dynamic blue
underside fully undersealed for extra protection
Chassis-front
newage front end used
Newage front subframe (white)
Newage front arms (highly polished)
white line adjustable 24mm ajustable anti roll bar (red)
CDF front drop links (race bushes)
Newage steering rack with modified universal joint
Chassis-rear
R180 hubs
R180 DIFF
R180 shafts
Rear WRC design tubular subframe (white)
Solid mount rear T brace (bushes replaced with solid mounts)
Rose jointed fully adjustable lateral arms (new)
Rose jointed adjustable trailing arms (new)
whiteline 24mm ajustable rear ARB (sprayed red)
CDF rear drop links (to be fitted)
Chassis protection - general exterior
fully undersealed
alloy sump/gearbox/rear diff guards (powder coated gold)
Kevlar sill guards (new)
Kevlar tank guard (new)
MSA mud flaps (new)
sill stands in gold
Carbon WRC type teardrop mirrors (new)
Bonnet pins (new)
Rear window polycarbonate (new)
side windows covered in msa window film (car comes with poly side windows unfitted)
Group A twin roof vents (new)
STI rear lights
High level spoiler
Headlamp protectors (new)
light bar (new)
Clear side repeaters (new)
Brakes - suspension
tein curciut master coilovers
front brembo 4 pot brakes (repainted)
rear brembo 2 pot brakes (repainted)
new bleed nipples
new vented and groved disc front and rear
new minted pads all round
Braided brake lines front to back (inside the car)
Brake bias valve (new)
hydraulic handbrake (new)
Brake servo delete
Wheels -tyres
17" Subaru STI alloys , just been refurbed
17" speedline ST2's (waiting to be fitted ) just been refurbed
toyo T1R tyres all round , brand new
RCM light weight wheel nuts (new £300)
STI dust caps (new)
full size spare
Interior - safety
Two matching bimarco front seats (Fia approved) (new)
TRS harnesses (new)
Flocked dash
Omg steering wheel (new)
Carbon passengers foot rest (new)
GRP door cards (very light) , pockets added (new)
Carbon dash center console (new)
Race battery behind driver (New)
Window washer behind passenger (new)
driver and passengers seat mounted drinking system (both new)
Brants rally timer
OMP intercom system with matching helmets (brand new never worn)
OMP helmet net (new)
Map light
All heaters removed and small electrical heater put in to clear screen
Carbon fuel covers (new)
OMP spare tyre strap (new)
wiring loom stripped and all unneeded wires removed
ignition and starter on buttons (new)
new fuse board added for the in car extras
defi gauges x 3 , boost , oil pressure , oil temp
defi 80mm rev counter and shift light (new)
Electrical plumbed in extinguisher (just serviced)
OMP hand held extinguisher (new)
cartek electric cut off (new)
OMP seatbelt cutters (new)
First aid kits
Engine - gearbox
alkatec ECU antilag and launch control enabled (to be mapped)
Braided fuel lines front to back (inside car )
parrlell fuel rails
braided lines with an6 fittings under the bonnet
SX FPR with pressure gauge
inlet manifold spacers
044 in tank pump
swirl pot with built in fuel pump (sytec pump)
bell mouth 3"-2.5" down pipe
cobra RACE exhaust (very loud)
Front mount intercooler , runs under headlights
TD05 turbo
Induction kit
Oil cooler kit (disconnected at sandwich plate)
inlet manifold redone in crinkle red
alternator done in chrome and red
newage power steering relocation
MSA fuel sampling kit
anodised bolt dress up kit
cam belt covers dipped with Union Jack
gearbox
JDM 6 speed gearbox with matching hubs , shafts and diff
Perrin short shift kit
brand new gear ****
Shell prep
shell has been fully stripped bare and all sound deadening removed
extra plating added to the front turrets for more strength
front panel was cut off and made stronger and lighter
tunnels welded into the front of the chassis legs to allow for the front mount piping to have a shorter and safer run under the headlights
full weld in roll cage ,including dash bar and though to the turrets roof bars and seat bars
sill stand holes welded in
fully welded in place parcel shelf
lots of tags have also been added around the car to allow the loom and other bits to be secured safely and neatly
rear arches have been rolled and flared for extra room
interior sprayed silver
outside and engine bay sprayed Skoda dynamic blue
underside fully undersealed for extra protection
Chassis-front
newage front end used
Newage front subframe (white)
Newage front arms (highly polished)
white line adjustable 24mm ajustable anti roll bar (red)
CDF front drop links (race bushes)
Newage steering rack with modified universal joint
Chassis-rear
R180 hubs
R180 DIFF
R180 shafts
Rear WRC design tubular subframe (white)
Solid mount rear T brace (bushes replaced with solid mounts)
Rose jointed fully adjustable lateral arms (new)
Rose jointed adjustable trailing arms (new)
whiteline 24mm ajustable rear ARB (sprayed red)
CDF rear drop links (to be fitted)
Chassis protection - general exterior
fully undersealed
alloy sump/gearbox/rear diff guards (powder coated gold)
Kevlar sill guards (new)
Kevlar tank guard (new)
MSA mud flaps (new)
sill stands in gold
Carbon WRC type teardrop mirrors (new)
Bonnet pins (new)
Rear window polycarbonate (new)
side windows covered in msa window film (car comes with poly side windows unfitted)
Group A twin roof vents (new)
STI rear lights
High level spoiler
Headlamp protectors (new)
light bar (new)
Clear side repeaters (new)
Brakes - suspension
tein curciut master coilovers
front brembo 4 pot brakes (repainted)
rear brembo 2 pot brakes (repainted)
new bleed nipples
new vented and groved disc front and rear
new minted pads all round
Braided brake lines front to back (inside the car)
Brake bias valve (new)
hydraulic handbrake (new)
Brake servo delete
Wheels -tyres
17" Subaru STI alloys , just been refurbed
17" speedline ST2's (waiting to be fitted ) just been refurbed
toyo T1R tyres all round , brand new
RCM light weight wheel nuts (new £300)
STI dust caps (new)
full size spare
Interior - safety
Two matching bimarco front seats (Fia approved) (new)
TRS harnesses (new)
Flocked dash
Omg steering wheel (new)
Carbon passengers foot rest (new)
GRP door cards (very light) , pockets added (new)
Carbon dash center console (new)
Race battery behind driver (New)
Window washer behind passenger (new)
driver and passengers seat mounted drinking system (both new)
Brants rally timer
OMP intercom system with matching helmets (brand new never worn)
OMP helmet net (new)
Map light
All heaters removed and small electrical heater put in to clear screen
Carbon fuel covers (new)
OMP spare tyre strap (new)
wiring loom stripped and all unneeded wires removed
ignition and starter on buttons (new)
new fuse board added for the in car extras
defi gauges x 3 , boost , oil pressure , oil temp
defi 80mm rev counter and shift light (new)
Electrical plumbed in extinguisher (just serviced)
OMP hand held extinguisher (new)
cartek electric cut off (new)
OMP seatbelt cutters (new)
First aid kits
Engine - gearbox
alkatec ECU antilag and launch control enabled (to be mapped)
Braided fuel lines front to back (inside car )
parrlell fuel rails
braided lines with an6 fittings under the bonnet
SX FPR with pressure gauge
inlet manifold spacers
044 in tank pump
swirl pot with built in fuel pump (sytec pump)
bell mouth 3"-2.5" down pipe
cobra RACE exhaust (very loud)
Front mount intercooler , runs under headlights
TD05 turbo
Induction kit
Oil cooler kit (disconnected at sandwich plate)
inlet manifold redone in crinkle red
alternator done in chrome and red
newage power steering relocation
MSA fuel sampling kit
anodised bolt dress up kit
cam belt covers dipped with Union Jack
gearbox
JDM 6 speed gearbox with matching hubs , shafts and diff
Perrin short shift kit
brand new gear ****
Last edited by domino46; 07 March 2019 at 05:11 PM.
#76
Scooby Regular
Thread Starter
quick update for anyone who might be interested ,,, been in the garage a while over the winter not doing much ,, but iv now fitted the 6 speed box and rear end ,, and have done some engine bay bits to tidy things up (not to everyones taste but I like it ), added fuel rails and swirl pot ,, slowly getting there and hopefully won't change my mind about spec this time lol
#77
Scooby Regular
quick update for anyone who might be interested ,,, been in the garage a while over the winter not doing much ,, but iv now fitted the 6 speed box and rear end ,, and have done some engine bay bits to tidy things up (not to everyones taste but I like it ), added fuel rails and swirl pot ,, slowly getting there and hopefully won't change my mind about spec this time lol
Any pictures of the fuel rails installed?
=)
#80
Scooby Regular
Thread Starter
thought id give a bit of a update on the rally car build ,,,, well its sold now ,,, brought by a rally driver all the way on the other side of the world in OZ ,,, so its been on a ship at sea for the last few months but its just arrived over there ,,, very proud to have a car being used properly over there
#82
Scooby Regular
iTrader: (2)
Join Date: Oct 2002
Location: oop north in a spec-c.Now sold and starting on a classic ra track/sprint/road car
Posts: 2,536
Likes: 0
Received 7 Likes
on
7 Posts
Good to see you got it moved on Dom sure i saw it down at rally day last year on one of the stands as i drove past
#84
Scooby Regular
Thread Starter
iv got a blob sti that I brought to fly around in while I make my mind up but I think iv chosen the next motor lol ,there was a few on the list but iv got it down to one or two now lol,, im after a Bentley GT SPEED if I can get one that I like ,,, or possibly a Supersports but I prefer the speed really ,,, or possibly a M5