Notices

UK 300 prodrive headlights!

Thread Tools
 
Search this Thread
 
Old Mar 6, 2017 | 09:28 PM
  #1  
Rob6430's Avatar
Rob6430
Thread Starter
Scooby Newbie
 
Joined: Mar 2017
Posts: 5
Likes: 0
From: Rye
Default UK 300 prodrive headlights!

Hi all sorry if this has been covered before but......! Dip beam is ****e! Any ideas? Thanks in advance

Rob
Reply
Old Mar 7, 2017 | 10:13 AM
  #2  
alcazar's Avatar
alcazar
Scooby Regular
20 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Jun 2002
Posts: 40,788
Likes: 30
From: Rl'yeh
Default

First off, are you sure it's aligned properly and, equally importantly, that whatever bulbs are fitted are seated properly?

The first is simple setup, easily done on a wall with the car standing about 8-10m away. Don't forget to do horizontal alignment as well as vertical, take a mate to stand in front of one light while you point the other, or drape a towel over one while adjusting the other.
The second is easy to get wrong and results in massive beam scatter for a very small misalignment of the bulb.

You don't say what's wrong with the dip? Not bright enough? Try uprated bulbs, NOT higher wattage, but something like this: http://www.autobulbsdirect.co.uk/upg...adlight-bulbs/

If it's scatter, check the bulb fitment, replace cheap bulbs with decent branded ones, (Hella, Ring, Philips etc), and ensure that the lens and reflector are both spotless.

I would advise against fitting an aftermarket HID kit. Brighter? Usually...but also can have far more scatter and disappointing results, plus they tend to upset oncoming drivers.

Last edited by alcazar; Mar 7, 2017 at 10:15 AM.
Reply
Old Mar 7, 2017 | 11:09 AM
  #3  
Don Clark's Avatar
Don Clark
Scooby Regular
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Feb 2003
Posts: 7,837
Likes: 834
From: Harpenden
Default

Have you seen this thread? maybe contact the OP on what he's done.

https://www.scoobynet.com/members-ga...t-rebuild.html
Reply
Old Mar 7, 2017 | 03:05 PM
  #4  
Rob6430's Avatar
Rob6430
Thread Starter
Scooby Newbie
 
Joined: Mar 2017
Posts: 5
Likes: 0
From: Rye
Default

Thanks alcazar. Didn't make it very clear! Lol
they are patterning ok but there just not bright enough. White light but so dim you can't drive on them. They are like a drl!!

rob
Reply
Old Mar 7, 2017 | 04:45 PM
  #5  
Scoby doo's Avatar
Scoby doo
Scooby Regular
 
Joined: Feb 2017
Posts: 90
Likes: 0
From: Wales
Default

Originally Posted by Don Clark
Have you seen this thread? maybe contact the OP on what he's done.

https://www.scoobynet.com/members-ga...t-rebuild.html
Whats an op ?
Reply
Old Mar 7, 2017 | 05:54 PM
  #6  
Scoby doo's Avatar
Scoby doo
Scooby Regular
 
Joined: Feb 2017
Posts: 90
Likes: 0
From: Wales
Default

Originally Posted by Rob6430
Thanks alcazar. Didn't make it very clear! Lol
they are patterning ok but there just not bright enough. White light but so dim you can't drive on them. They are like a drl!!

rob
Chage the bulbs to a bright better quality i used nightbreaker pluss bulbs there much brighter and better distance by far. Look on ebay h7 55w same as standard but much brighter whiter light.
Reply
Old Mar 7, 2017 | 06:03 PM
  #7  
Rob6430's Avatar
Rob6430
Thread Starter
Scooby Newbie
 
Joined: Mar 2017
Posts: 5
Likes: 0
From: Rye
Default

Cheers scooby doo. Can't believe they sold it with lights like that though!
Reply
Old Mar 7, 2017 | 06:30 PM
  #8  
Don Clark's Avatar
Don Clark
Scooby Regular
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Feb 2003
Posts: 7,837
Likes: 834
From: Harpenden
Default

Originally Posted by Scoby doo
Whats an op ?
Original Poster - thread starter
Reply
Old Mar 7, 2017 | 07:27 PM
  #9  
Scoby doo's Avatar
Scoby doo
Scooby Regular
 
Joined: Feb 2017
Posts: 90
Likes: 0
From: Wales
Default

These are the 1s i fitted hope this helps
Originally Posted by Rob6430
Cheers scooby doo. Can't believe they sold it with lights like that though!
no probs. Is the chrome nice and shiny in the laps as i thought mine was ok till i compared them with a new unit. Take a look at the difference between new and old unit' i tried them bulbs in old unit but they was better but still couldnt see at night. That why i bought mew 1's now i get people flash at me thinking im on main beam.

Last edited by Scoby doo; Mar 7, 2017 at 07:40 PM.
Reply
Old Mar 7, 2017 | 08:19 PM
  #10  
Rob6430's Avatar
Rob6430
Thread Starter
Scooby Newbie
 
Joined: Mar 2017
Posts: 5
Likes: 0
From: Rye
Default

Things have moved on a little tonight! Been grovelling about under the unit and have found some off these!!Click image for larger version

Name:	image.jpg
Views:	0
Size:	262.1 KB
ID:	22319
Reply
Old Mar 8, 2017 | 10:56 AM
  #11  
alcazar's Avatar
alcazar
Scooby Regular
20 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Jun 2002
Posts: 40,788
Likes: 30
From: Rl'yeh
Default

Oh dear, the dreaded HID aftermarket kit....
Reply
Old Mar 8, 2017 | 12:40 PM
  #12  
Rob6430's Avatar
Rob6430
Thread Starter
Scooby Newbie
 
Joined: Mar 2017
Posts: 5
Likes: 0
From: Rye
Default

I don't what's going on now really! Lots of people saying original lights a crap, but they can't be worse than these you can't see where you going at all on dip. Original plugs aren't there so I'm going to struggle going back to standard with brighter bulbs without wireing diagram. 😡
Reply




All times are GMT +1. The time now is 02:15 PM.