UK 300 prodrive headlights!
#2
Scooby Regular
iTrader: (2)
First off, are you sure it's aligned properly and, equally importantly, that whatever bulbs are fitted are seated properly?
The first is simple setup, easily done on a wall with the car standing about 8-10m away. Don't forget to do horizontal alignment as well as vertical, take a mate to stand in front of one light while you point the other, or drape a towel over one while adjusting the other.
The second is easy to get wrong and results in massive beam scatter for a very small misalignment of the bulb.
You don't say what's wrong with the dip? Not bright enough? Try uprated bulbs, NOT higher wattage, but something like this: http://www.autobulbsdirect.co.uk/upg...adlight-bulbs/
If it's scatter, check the bulb fitment, replace cheap bulbs with decent branded ones, (Hella, Ring, Philips etc), and ensure that the lens and reflector are both spotless.
I would advise against fitting an aftermarket HID kit. Brighter? Usually...but also can have far more scatter and disappointing results, plus they tend to upset oncoming drivers.
The first is simple setup, easily done on a wall with the car standing about 8-10m away. Don't forget to do horizontal alignment as well as vertical, take a mate to stand in front of one light while you point the other, or drape a towel over one while adjusting the other.
The second is easy to get wrong and results in massive beam scatter for a very small misalignment of the bulb.
You don't say what's wrong with the dip? Not bright enough? Try uprated bulbs, NOT higher wattage, but something like this: http://www.autobulbsdirect.co.uk/upg...adlight-bulbs/
If it's scatter, check the bulb fitment, replace cheap bulbs with decent branded ones, (Hella, Ring, Philips etc), and ensure that the lens and reflector are both spotless.
I would advise against fitting an aftermarket HID kit. Brighter? Usually...but also can have far more scatter and disappointing results, plus they tend to upset oncoming drivers.
Last edited by alcazar; 07 March 2017 at 10:15 AM.
#3
Scooby Regular
Have you seen this thread? maybe contact the OP on what he's done.
https://www.scoobynet.com/members-ga...t-rebuild.html
https://www.scoobynet.com/members-ga...t-rebuild.html
#4
Scooby Newbie
Thread Starter
Join Date: Mar 2017
Location: Rye
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Thanks alcazar. Didn't make it very clear! Lol
they are patterning ok but there just not bright enough. White light but so dim you can't drive on them. They are like a drl!!
rob
they are patterning ok but there just not bright enough. White light but so dim you can't drive on them. They are like a drl!!
rob
#5
Have you seen this thread? maybe contact the OP on what he's done.
https://www.scoobynet.com/members-ga...t-rebuild.html
https://www.scoobynet.com/members-ga...t-rebuild.html
#6
Chage the bulbs to a bright better quality i used nightbreaker pluss bulbs there much brighter and better distance by far. Look on ebay h7 55w same as standard but much brighter whiter light.
Trending Topics
#8
Scooby Regular
#9
These are the 1s i fitted hope this helps
no probs. Is the chrome nice and shiny in the laps as i thought mine was ok till i compared them with a new unit. Take a look at the difference between new and old unit' i tried them bulbs in old unit but they was better but still couldnt see at night. That why i bought mew 1's now i get people flash at me thinking im on main beam.
no probs. Is the chrome nice and shiny in the laps as i thought mine was ok till i compared them with a new unit. Take a look at the difference between new and old unit' i tried them bulbs in old unit but they was better but still couldnt see at night. That why i bought mew 1's now i get people flash at me thinking im on main beam.
Last edited by Scoby doo; 07 March 2017 at 07:40 PM.
#12
Scooby Newbie
Thread Starter
Join Date: Mar 2017
Location: Rye
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
I don't what's going on now really! Lots of people saying original lights a crap, but they can't be worse than these you can't see where you going at all on dip. Original plugs aren't there so I'm going to struggle going back to standard with brighter bulbs without wireing diagram. 😡