Hard turbo inlet pipe / vf35 Blobeye
#2
Scooby Regular
iTrader: (1)
Join Date: Feb 2015
Location: Walsall west mids
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
I'm interested in this too, I struggled to find a hard pipe for mine So I bought a cheap second hand inlet and shoved a piece of 2.5" Ali pipe inside it to stop it collapsing under boost.
#3
Scooby Regular
Thread Starter
Join Date: Jun 2016
Location: Yorkshire
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
Im going to have a go at making one up in next cpl of weeks, just need to source an offset silicone coupler, and get some measurements done, ill post an update when i can.
#5
Scooby Regular
iTrader: (1)
Join Date: Apr 2005
Location: In the Flatlands of Lincolnshire
Posts: 2,892
Likes: 0
Received 0 Likes
on
0 Posts
http://www.airpowersystems.com/wrx/intake/intake.htm
Got one of these on my bugeye, running a FP green turbo with 3 inch inlet.
Got one of these on my bugeye, running a FP green turbo with 3 inch inlet.
#6
Scooby Regular
Thread Starter
Join Date: Jun 2016
Location: Yorkshire
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
http://www.airpowersystems.com/wrx/intake/intake.htm
Got one of these on my bugeye, running a FP green turbo with 3 inch inlet.
Got one of these on my bugeye, running a FP green turbo with 3 inch inlet.
Any idea how much they are?
cheers
#7
Scooby Regular
iTrader: (23)
Join Date: May 2006
Location: Rota Subzeros FOR sale!
Posts: 3,701
Likes: 0
Received 0 Likes
on
0 Posts
Place in the states sell an offset coupler, been looking in the UK but not found anyone yet as looking at doing the same. If it comes to it I might just cut my silicone inlet hose
RR
RR
Trending Topics
#8
Scooby Regular
iTrader: (1)
Join Date: Feb 2015
Location: Walsall west mids
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
Just as cheap to buy eBay silicone inlet for £30 and cut the end off to connect to a hard pipe. At least you can cut it wer u want to gain a bit more where you would be slotting over hard pipe.
#9
Scooby Regular
Thread Starter
Join Date: Jun 2016
Location: Yorkshire
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
Cant seem to find anyone in UK that does something similar.
#10
Scooby Regular
Thread Starter
Join Date: Jun 2016
Location: Yorkshire
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
On the other hand, ive just ordered a new viper turbo inlet, as mine is leaking and need the car.
With the old inlet off, ill have a better idea / pattern to make up hard pipe.
#12
Scooby Regular
Think iv got one or two spare offset ones as I brought some from FOrced performance when I fitted there inlet pipe and turbo , I'll take a look this evening for you guys , but can't promise anything as I may have used them on another project as my memory is terrible these days
Last edited by domino46; 07 February 2017 at 10:22 AM.