Hard turbo inlet pipe / vf35 Blobeye
 

As above, just seeing if anyone has one or knows anyone that fabricates them?

cheers

I'm interested in this too, I struggled to find a hard pipe for mine So I bought a cheap second hand inlet and shoved a piece of 2.5" Ali pipe inside it to stop it collapsing under boost.

Im going to have a go at making one up in next cpl of weeks, just need to source an offset silicone coupler, and get some measurements done, ill post an update when i can.

Nice one

http://www.airpowersystems.com/wrx/intake/intake.htm


Got one of these on my bugeye, running a FP green turbo with 3 inch inlet.

Appreciate the link Ste, pipe looks good quality
Any idea how much they are?

cheers

Place in the states sell an offset coupler, been looking in the UK but not found anyone yet as looking at doing the same. If it comes to it I might just cut my silicone inlet hose

RR

Just as cheap to buy eBay silicone inlet for £30 and cut the end off to connect to a hard pipe. At least you can cut it wer u want to gain a bit more where you would be slotting over hard pipe.

Guess your talking about this one...
https://cimg3.ibsrv.net/gimg/www.sco...5b867e3167.jpg
Cant seem to find anyone in UK that does something similar.

Had not thought of that, good idea! Ill probably go with the HPS above, looks a decent offset to line up hard pipe.

On the other hand, ive just ordered a new viper turbo inlet, as mine is leaking and need the car.
With the old inlet off, ill have a better idea / pattern to make up hard pipe.

Yip thats the one, i'll prob just cut my intake pipe to suit.

Think iv got one or two spare offset ones as I brought some from FOrced performance when I fitted there inlet pipe and turbo , I'll take a look this evening for you guys , but can't promise anything as I may have used them on another project as my memory is terrible these days

Only have one HPS one , same as in the pic above ,, first come first serve basis , £20 plus postage


https://cimg9.ibsrv.net/gimg/www.sco...69892c7cdf.jpg

I'll take it if you can firm the size of the openings to fit a VF35?

Thanks

What size is a vf35 inlet and I'll check asap

No idea! Think it's 48 50 mm