Avital MAXX 1 not chirping / sounding
14 November 2010, 05:00 PM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Nov 2010
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Avital MAXX 1 not chirping / sounding
My wrx has an Avital Maxx 1 alarm fitted. I get the flashes when setting and disarming, but not the chirps.
It all seems to work ok, with it auto setting itself after 30 seconds, and when it goes off the indicators flash but I get no sound whatsoever.
No chirps, no alarm sounds at all. Any clues? Will I need to replace the siren under the bonnet? And where could I get one / how hard would it be?
It all seems to work ok, with it auto setting itself after 30 seconds, and when it goes off the indicators flash but I get no sound whatsoever.
No chirps, no alarm sounds at all. Any clues? Will I need to replace the siren under the bonnet? And where could I get one / how hard would it be?
21 November 2010, 06:31 PM
#3
Scooby Newbie
Join Date: Nov 2010
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hi there K1985,
Sounds like your alarm is in silent arm/disarm mode. This can be changed by going into programming mode - but you'll need the manual to do it.
I have the user manual and installation manual for this alarm if you're interested. Drop me your email and I'll forward them on if you'd like them.
Six Fingered Mike
Sounds like your alarm is in silent arm/disarm mode. This can be changed by going into programming mode - but you'll need the manual to do it.
I have the user manual and installation manual for this alarm if you're interested. Drop me your email and I'll forward them on if you'd like them.
Six Fingered Mike
Thread
Thread Starter
Forum
Replies
Last Post
