Smart Windows 4
10 May 2009, 10:57 AM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2001
Posts: 698
Likes: 0
Received 0 Likes
on
0 Posts
Smart Windows 4
Fitted 2 smart windows 4 units to my avantguard alarm couple of problems i cant seem to sort out programed them after a bit of hassle and they all close upon arming the alarm
but i cant get the vent function or the remote control opening to work
the owners guide says press clifford button and then the boot release button within 10 seconds of arming to vent and to remote open them press the same buttons within 10 seconds of disarming but neither of these functions work
Also when programing it says to select ID 2 from the drop down menu for the second set of windows but there was only 1 showing
Thought this may be a problem with the data cable connections but it cant be as everything must be communicating because the windows roll up on arming
is this right or am i missing something
any advice or help appreiciated
Gary
but i cant get the vent function or the remote control opening to work
the owners guide says press clifford button and then the boot release button within 10 seconds of arming to vent and to remote open them press the same buttons within 10 seconds of disarming but neither of these functions work
Also when programing it says to select ID 2 from the drop down menu for the second set of windows but there was only 1 showing
Thought this may be a problem with the data cable connections but it cant be as everything must be communicating because the windows roll up on arming
is this right or am i missing something
any advice or help appreiciated
Gary
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
hardcoreimpreza
Computer & Technology Related
21
11 October 2015 03:40 PM
