Is it possible to adjust the sensitivity of the proximity sensors for a Clifford using only the key fob? or do I take it back to the place that fitted it?

 

if you got a handbook with your system, it will have instructions on how to do this.

 

eh I dont have a handbook hence the post

 

do a search on google it is on ,places that fit them wont tell you how to change it they are not allowed ,if you have the master fob you can do it with the cliford button and the star keys but cannot remember how you do it
i think its clifford x2 then the 1 star key

 

thanks for that phil. I will have a search around. I do have the master key fob with the Clifford button.

 

hi mate if i remember right you can do it from your handset and via the blackjax/two button immobiliser code entry. goto Clifford - Vehicle Security | Remote Start | GPS Tracking it should tell u in the support links section if no joy i will have to dig me manual out for you laters hope this helps and have a good one!

 

thanks for that fwdnutz. The manual says "to adjust the sensitivity of any of the sensors please return to your Clifford dealer".

I did find some instructions on how to do it with the Key Fob but I'd rather give it back to the installer to do it.

thanks for the replies.

 

Me to. At least they know what they are doing.

 

you have a pm

 

Cheers