g5alive

Hi, just bought a scooby with conecpt 500 installed with the proximity sensor on it.

Th setting is fine on my driveway but having to park on the rd at work is causing probs, the setting is too sensitive. How do i turn the sensor off and back on again via the fob? Or can i?

Thanks loads.

Dave

evolutionice.com

To turn off:

Companion (4 button) remote

Press the (headlight) and (lock/unlock) buttons after you arm the system

Master (5 button) remote

press the side button twice then button 2 (first small button clockwise from the top)

From your manual:
Pressing LevelShift button twice, then button 2 on the master remote control or buttons (headlight)+(lock/unlock) on the companion remote anytime while the system is armed will override the warning zone of the Proximity Sensor. This prevents the system from sounding warnings if you must park your vehicle in an area with heavy pedestrian traffic. A second press of this button combination anytime afterward while the system is still armed will override both zones of the Proximity Sensor. This comes in handy when you must temporarily leave a pet or a passenger in the vehicle. This remote zone override is visually confirmed with 4 flashes of the indicator lights. The sensor zones are automatically restored the next time you arm.

Manual: 500 is same as 600 (almost)

http://www.clifford.com/guides/ogs/c...0uk_owners.pdf