toad a101cl installation
02 February 2003, 06:31 PM
#1
Scooby Newbie
Thread Starter
Join Date: Feb 2003
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
igonna start to install my toad 1o1 alarm and dont know wether my v/xhall corsa 1195 1.2 cl has got pos or neg or single wire trigger locking any info much needed and should the power feed wire for indicators be plugged 2gether or should it be earthed
any advise much appreciated
any advise much appreciated
02 February 2003, 07:50 PM
#3
Scooby Regular
Join Date: Nov 2001
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Berty,
Locking is neg pulse, brown/white (unlock) and brown/red (lock)and can be found coming out either door harness. Please note this will not operate the Vauxhall Deadlocks. Indicator feed should be seperately fused at 20A to a permanent live. There is a heavy red wire in the n/s kickpanel that when tested will not have power to it but if you try a fuse in one of the spare ways in the fusebox it will become live! Good luck.
Locking is neg pulse, brown/white (unlock) and brown/red (lock)and can be found coming out either door harness. Please note this will not operate the Vauxhall Deadlocks. Indicator feed should be seperately fused at 20A to a permanent live. There is a heavy red wire in the n/s kickpanel that when tested will not have power to it but if you try a fuse in one of the spare ways in the fusebox it will become live! Good luck.
Thread
Thread Starter
Forum
Replies
Last Post