Right chaps ive read that the dealer can activate the code keypad so it asks for a code before allowing the car to start so evan if the keys are stolen or your car jacked as soon as its shut down it will ask for the code.

My question is has anyone had it done yet?
Any problems ?
Or is it a pain putting code in all time ?

Cheers chaps

 

Key Theft Protection is one of the programming features of the Sigma S32 Alarm.

You'd probably soon get fed up with it - I know I would

 

Thanks mate my manual says it can be activated by the dealer as they are turned off on installation

 

*17856 *013 * 0 or * 1 then #
Key Theft Protection - On/Off
NB: Only S4, 30, 32 & 34 models
* 0 (off)

 

How you know this mate my manual says only subaru dealers can turn it on

 

Because Rob84 works for Stan Palmers

 

Whats stan pamers

 

Subaru dealer

 

Awesum thanks mate ive just done this

 

Is there anyway to relocate the keypad ?

 

Yes, You don't have to have it fitted there. You'll need to locate the alarm ecu which is above the radio & unplug it, follow the wires back to the keypad cutting the zip ties off it. Move it were you desire and re secure the wires and plug back into the alarm ecu