Knocklink fitting
#1
Anyone know a garage that will fit my knocklink for me preferably as close to Hamilton as possible? I have the mechanical and electrical know how of a labrador!!
Thanks
J
Thanks
J
#2
Scooby Regular
The Garage in Wishaw (about 15min drive from Hamilton) would fit this for you; I now they've done one or two already for different cars.
To be honest it's a piece of pi$$ and you'd be better having a crack at it yerself. I'm a mechanical/electrical numptie and I found it a doddle.
Biggest hassle is taking off the centre trim to get access to the ciggie lighter wires (for the 12v supply). Do you trust any garage removing this and not scratching it?
Stefan
To be honest it's a piece of pi$$ and you'd be better having a crack at it yerself. I'm a mechanical/electrical numptie and I found it a doddle.
Biggest hassle is taking off the centre trim to get access to the ciggie lighter wires (for the 12v supply). Do you trust any garage removing this and not scratching it?
Stefan
#4
#5
Janner,
I'm only 5mins from you in Uddingston, I fitted one to my car so car give you a hand if you want to do it yourself. It only took me 30 mins to fit mine, the biggest part of that was deciding where to put it.
Give me a shout if you want a hand with it.
Scott
I'm only 5mins from you in Uddingston, I fitted one to my car so car give you a hand if you want to do it yourself. It only took me 30 mins to fit mine, the biggest part of that was deciding where to put it.
Give me a shout if you want a hand with it.
Scott
#6
Cheers for the offer Scottdot but I have managed to get the sensor in so I just need to wire the thing up. Where can I connect the live, can I connect it to the horn? Where is the easiest place to connect it?
Thanks
J
Thanks
J
#7
Scooby Regular
AWD are good, but for God sake don't drive to Perth just to have one of these fitted.
The important thing is the live wire needs to be hot when the ignition is switched on. I took mine from the back of the cigarette lighter.
There's pics on my website
Stefan
[Edited by ozzy - 8/17/2003 11:09:17 PM]
The important thing is the live wire needs to be hot when the ignition is switched on. I took mine from the back of the cigarette lighter.
There's pics on my website
Stefan
[Edited by ozzy - 8/17/2003 11:09:17 PM]
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM