Spare Ignition Lock Needed With Key.
#2
Scooby Regular
Join Date: Sep 2001
Location: Aberdeen
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Glenburgie Subaru have these listed for 92-00 models but as full lock sets at £65.
See under Parts - Misc. at Glenburgie Subaru
[Edited by Abzdon - 8/15/2003 8:24:34 PM]
See under Parts - Misc. at Glenburgie Subaru
[Edited by Abzdon - 8/15/2003 8:24:34 PM]
#3
That was lucky, I may need a steering lock / set shortly! see below.
I have a MY94 wagon WRX.
When stopped and turned off engine, can't get the key out of the ignition!
Seems to not be able to push in the barrel / lock thingy so the key will not turn the last q/r turn and come out.
A lot of wiggling back and forward and it usuall;y then comes out.
Tried a spare key, same problem.
This igntion lock is the one that lights up with a green glowing collar when the key goes in, and beeps if door open etc. and key is put in.
If it needs a new ignition lock / barrel, any idea of cost?
Will UK dealers have them / supply them for an import?
Is it the sort of thing the specialist retailers on here would have or would I need a breaker?
If I had to change barrel can it be reset to use existing key, to save having to carry 2 keys?
Thanks
Neil
I have a MY94 wagon WRX.
When stopped and turned off engine, can't get the key out of the ignition!
Seems to not be able to push in the barrel / lock thingy so the key will not turn the last q/r turn and come out.
A lot of wiggling back and forward and it usuall;y then comes out.
Tried a spare key, same problem.
This igntion lock is the one that lights up with a green glowing collar when the key goes in, and beeps if door open etc. and key is put in.
If it needs a new ignition lock / barrel, any idea of cost?
Will UK dealers have them / supply them for an import?
Is it the sort of thing the specialist retailers on here would have or would I need a breaker?
If I had to change barrel can it be reset to use existing key, to save having to carry 2 keys?
Thanks
Neil
#4
Sounds like exactly the same problem as I had mate. I think it's down to the key as I had a new key cut with the code on the side of the original, and it now works perfectly!!I would have a key cut with the code. If you can't find anywhere, give me your code and I'll go to the place I had it done and send you the key. It's around £5!! Basically the key gets worn and can't push the mechanism in because there isn't enough push from the shoulder part of the key.
Let me know mate.
Al.
Let me know mate.
Al.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
robbie1988
Wanted
2
13 September 2015 09:25 AM
Scooby-Doo 2
Wheels And Tyres For Sale
1
09 September 2015 06:51 PM