boydy2013

Hi all,
Currently looking for stuff on behalf of a friend.

Im looking for some diagrams/exploded views on most of the engine and components. More so crank case ventilation, pipe work etc.

Also could anyone tell me common problems that occur with the engines in the P1 as it is not running right and i think he has checked most things and pulled codes to see whats wrong but still no luck.

Thanks in advance.

tayscooby

iTrader: (3)

Where you located?

boydy2013

Falkirk

James.

Ciaran

iTrader: (16)

Has the MAF been checked?
Easiest way to check is take car for gentle drive and then disconnect if disconnection is obvious and car stalls or idle changes instantly your MAF is okay. If disconnection makes no difference to idle the MAF is done and the ECU has learnt to run without it.

If you could give more details of the said issue it would be helpful

The Trooper 1815

iTrader: (31)

Massive subject on "not running right". A bit more detail is probably needed on this one to get the best answer.

The website below will give you all the part diagrams you need.

http://opposedforces.com/parts/

http://opposedforces.com/parts/impreza/en_g10/type_42/

boydy2013

I understand what your saying.
I was in it the other day only on a 2 minute drive to the shops.
I feel the general running of the car is fine although at idle i think there is a couple of misses here and there.

I'll tell him about the MAF and get him to try it out if he has not already done so.

Thanks.

albob

there is a P1 manual on Cannells' site

http://www.cannell.co.uk/Subaru_Work...impreza_p1.pdf

not a full service manual tho'