Geometry setting for standard 2005 WRX
Thread Starter
Scooby Regular
iTrader: (2)
Joined: Apr 2004
Posts: 15,029
Likes: 0
From: Somewhere in Kent, sniffing some V-Power
Had my wheel refurbished recently but I think the balancing is a bit out as I get some vibration at around 70mph. Also the car pulls to the left on anything other than flat roads and quite severely on heavily cambered roads.
I'm going to get the balancing and alignment checked today and I wondered if anyone has some settings that would make for a good fast road setup?
Any help or advice appreciated.
I'm going to get the balancing and alignment checked today and I wondered if anyone has some settings that would make for a good fast road setup?
Any help or advice appreciated.
Last edited by Gear Head; Dec 19, 2013 at 09:27 AM.
Hi there
Good starting point can or will be Prodrive settings for you
http://www.subaru-impreza.org/forum/...ings-here.html
Although I prefer more camber at front and less at rear,but above setting can help at least and from those settings I would go
Jura
Jura
Good starting point can or will be Prodrive settings for you
http://www.subaru-impreza.org/forum/...ings-here.html
Although I prefer more camber at front and less at rear,but above setting can help at least and from those settings I would go
Jura
Jura
Thread Starter
Scooby Regular
iTrader: (2)
Joined: Apr 2004
Posts: 15,029
Likes: 0
From: Somewhere in Kent, sniffing some V-Power
Thanks pal. I guess bad settings could cause the car to pull to the left, unless I have a failed suspension component. As said, on a flat road, it doesn't pull at all, on a chambered road, if I let go of the wheel, I very quickly have to take hold again. Not sure what it is really.
Hi there
Badly balanced wheels can cause those problems and can cause vibrations,due this I would check firstly if wheels are balanced correctly and if nothing change after re-balancing I would check suspension parts like arb's,droplinks and bushes etc if they're OK
If still this persist I would do wheel alignment like above posted settings
Jura
Badly balanced wheels can cause those problems and can cause vibrations,due this I would check firstly if wheels are balanced correctly and if nothing change after re-balancing I would check suspension parts like arb's,droplinks and bushes etc if they're OK
If still this persist I would do wheel alignment like above posted settings
Jura
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
Jan 11, 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
Dec 14, 2015 08:16 AM




