Kedlestone

iTrader: (9)

I'm running a simtek on my newage mapped with AL (on a switch) and LC which should engage when first gear is selected. I never got around to using the LC as my clutch was on its last legs but when I went to try the other day it just hits the redline instead of the lower limit set by the LC. Am I right in thinking it could be a faulty gear selection switch? If so is it an easy job and who stocks the part other than dealers?

Turbotits

iTrader: (2)

Try switching it on in neutral with handbrake on. Then engage 1st handbrake off and try revving.

Yes it could be the nps

Kedlestone

iTrader: (9)

Is that a sequence that's common then? Will try it tomorrow. Only the AL is on a switch the LC should engage when first gear is selected.

Turbotits

iTrader: (2)

Mines a little tempremental too. Always engages like this though

Kedlestone

iTrader: (9)

Fair enough, will try it tomorrow.

Rosy

Mine does not engage with the handbrake on

Kedlestone

iTrader: (9)

That did the trick mate, nice one. Strange it should do that but nice to have it back.

Turbotits

iTrader: (2)

Glad its sorted