The Rig

iTrader: (13)

the original FPR has a small hose attached to a brass hose that runs up a bit towards the inlet manifold, then another small piece of rubber hose that connects onto the inlet manifold, cool.


can i use a whole length of silicone hose from the inlet manifold direct to the FPR, bypassing the brass metal pipe ?

basically, i cannot get the flexi pipe back onto the brass pipe as its obstructed byu the turbo/fuel lines, grrr

cheers

mickywrx

iTrader: (29)

Replied on your other thread.

AS Performance

iTrader: (4)

yes, its doing the same thing.............

The Rig

iTrader: (13)

cheers guys, thought as much, just didnt know if it needed to be metal for a length due to compression of the pipe under vaccuum etc etc, but i shall buy some silicone hose and go direct from FPR direct onto the inlet manifold :-)