DarrenSTI

iTrader: (3)

On an 05 sti obviously with brembos, wanting to fit Rota Grid Drift 9.5", do I need front spacers to clear the brakes?
3mm/5mm? If so where best to buy them?
Do you then need longer wheel bolts to give the nut more to grip onto?

D.O.M

iTrader: (4)

Yep spacers are needed for the Grids to clear brembos

DarrenSTI

iTrader: (3)

Research has found for a 5mm spacer I don't need extended studs.

So can I get some £10 ones off eBay? Are are they pants?
Next ones up are H&R and are £50.

harrisard

iTrader: (6)

Make sure there hubcentric!!

wrx9181

iTrader: (2)

Yep can get the ones you need at halfords so wheels clear brembos
Smallest ones

Ryan-STi

Id be interested in this too DarrenSTI let me know what you find out

DarrenSTI

iTrader: (3)

More research finds none centric on 3mm & 5mm spacers, they only start on 8mm, that's for the h&r make though.

With a 5mm can I stay with standard stud length?

harrisard

iTrader: (6)

It means they will sit perfectly central!! Some of the cheap universal ones can move off centre ever so slightly causing vibrations!!! Buy CHEAP buy TWICE.

Harri

DarrenSTI

iTrader: (3)

Every where only seem to do 5x100, I need the 5x114 in 5mm.

Who has a 2005 onwards with these spaces fitted?
where did you get them from?

darrenb87

iTrader: (1)

I dont think you can get hubcentric spacers in 5x114 smaller than 15mm.
May be wrong tho

stevie1982

iTrader: (16)

Didn't cdf racing on here make them, try the traders section

jura11

iTrader: (7)

As above for Rota you will need spacers(only for Brembo,for K-Sport you don't need to run),at 5mm you don't need run hubcentric,if you are not looking track yours car,not sure but Japspeed selling the Hubcentric spacers


Jura