2.5turbo into a 2001 wrx will it fit and what will i need help pls
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jan 2013
Location: huddersfield
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
2.5turbo into a 2001 wrx will it fit and what will i need help pls
hi all ive just broke 2006 hawk eye and im wanting to put the engine into my 2001 wrx what will i need and will it fit straight in pls help
olso still many parts left from hawkeye 07542440452
olso still many parts left from hawkeye 07542440452
#3
Scooby Regular
iTrader: (12)
Join Date: Apr 2007
Location: Littlehampton
Posts: 2,427
Likes: 0
Received 0 Likes
on
0 Posts
Yes it'll fit, I have a 2.5 with AVCS running in my 2002 bugeye, is the 2.5 hawk a WRX or STI?
You will need to swap the wiring loom for the bugeye loom and then add wiring for the AVCS, the usual solution is to do a tumbler delete mod and use the redundant wiring.
If the hawk was DBW you'll also need to use the bugeye manifold and throttle body.
The biggest expense will be the ECU swap, I'm running Syvecs but I believe Alcatec can run it as well.
Anything else you want to know?
You will need to swap the wiring loom for the bugeye loom and then add wiring for the AVCS, the usual solution is to do a tumbler delete mod and use the redundant wiring.
If the hawk was DBW you'll also need to use the bugeye manifold and throttle body.
The biggest expense will be the ECU swap, I'm running Syvecs but I believe Alcatec can run it as well.
Anything else you want to know?
#4
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jan 2013
Location: huddersfield
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
tnx guys
Yes it'll fit, I have a 2.5 with AVCS running in my 2002 bugeye, is the 2.5 hawk a WRX or STI?
You will need to swap the wiring loom for the bugeye loom and then add wiring for the AVCS, the usual solution is to do a tumbler delete mod and use the redundant wiring.
If the hawk was DBW you'll also need to use the bugeye manifold and throttle body.
The biggest expense will be the ECU swap, I'm running Syvecs but I believe Alcatec can run it as well.
Anything else you want to know?
You will need to swap the wiring loom for the bugeye loom and then add wiring for the AVCS, the usual solution is to do a tumbler delete mod and use the redundant wiring.
If the hawk was DBW you'll also need to use the bugeye manifold and throttle body.
The biggest expense will be the ECU swap, I'm running Syvecs but I believe Alcatec can run it as well.
Anything else you want to know?
Last edited by hawkeye1; 01 March 2013 at 07:37 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM