coolant help
#1
Scooby Regular
Thread Starter
Join Date: Sep 2012
Location: walsall
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
coolant help
Put everything back on and plubmed all engine back in my scoob turbo wagon, i know its a pain to bleed the coolant, but just a question at the back of the block the water pipes i think for heater...would it make a difference if they wrong way round, as i cant seem to get radiator warm not sure if circulating correct, checked all other pipe work and ok.
many thanks
many thanks
#2
Scooby Regular
iTrader: (4)
You cant bleed the coolant system on a scoob, if theres an airlock it needs draining and redoing. best to use the hose that goes to the turbo from the header tank slowly and no gurgles. Heater pipes being backwards may cause air lock problems when refilling. To drain properly remove the thermostat housing and check the thermostat is working. in this cold weather it takes a while to get decent heat coming out the blowers but if the stat is stuck open then it will take a lot longer.
Thread
Thread Starter
Forum
Replies
Last Post
Bazil_SW
Engine Management and ECU Remapping
24
21 September 2015 11:55 PM