tubular headers and exh cam pulleys
#1
Scooby Regular
Thread Starter
Join Date: Jan 2010
Location: glasgow
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
tubular headers and exh cam pulleys
lookin to purchase in the near future(03 blob sti)
anyone know were i can get these at reasonable price and quality.
thanks alot guys.
anyone know were i can get these at reasonable price and quality.
thanks alot guys.
#4
Scooby Regular
iTrader: (7)
Hi there
As above Jeff said,Tubular headers are recommended above 400bhp,bellow 400bhp ported headers should do trick,if you are will be running above 400bhp have look on eBay and search for WMS headers or Kakumei 3bolt headers
http://www.ebay.co.uk/itm/WMS-RS3-Im...item4167c111e3
Exhaust cams pulleys,what cams you will be running,if you will be running just standard cams(OE) you will don't need the exhaust cam pulleys,but f you are thinking to run wild/wilder cams speak to the Chris@CDF,Kev@ScoobyClinic,Mark@Lateral performance or RCM
Jura
As above Jeff said,Tubular headers are recommended above 400bhp,bellow 400bhp ported headers should do trick,if you are will be running above 400bhp have look on eBay and search for WMS headers or Kakumei 3bolt headers
http://www.ebay.co.uk/itm/WMS-RS3-Im...item4167c111e3
Exhaust cams pulleys,what cams you will be running,if you will be running just standard cams(OE) you will don't need the exhaust cam pulleys,but f you are thinking to run wild/wilder cams speak to the Chris@CDF,Kev@ScoobyClinic,Mark@Lateral performance or RCM
Jura
#5
Scooby Regular
Thread Starter
Join Date: Jan 2010
Location: glasgow
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
Hi there
As above Jeff said,Tubular headers are recommended above 400bhp,bellow 400bhp ported headers should do trick,if you are will be running above 400bhp have look on eBay and search for WMS headers or Kakumei 3bolt headers
http://www.ebay.co.uk/itm/WMS-RS3-Im...item4167c111e3
Exhaust cams pulleys,what cams you will be running,if you will be running just standard cams(OE) you will don't need the exhaust cam pulleys,but f you are thinking to run wild/wilder cams speak to the Chris@CDF,Kev@ScoobyClinic,Mark@Lateral performance or RCM
Jura
As above Jeff said,Tubular headers are recommended above 400bhp,bellow 400bhp ported headers should do trick,if you are will be running above 400bhp have look on eBay and search for WMS headers or Kakumei 3bolt headers
http://www.ebay.co.uk/itm/WMS-RS3-Im...item4167c111e3
Exhaust cams pulleys,what cams you will be running,if you will be running just standard cams(OE) you will don't need the exhaust cam pulleys,but f you are thinking to run wild/wilder cams speak to the Chris@CDF,Kev@ScoobyClinic,Mark@Lateral performance or RCM
Jura
lookin to get the torque up and miby a we bit more power.
limited at the moment due to standard internals.
was advised by my garage of headers and also told the exhaust pulleys would be good as small adjustments can gain power/torque?
thanks again for reply.
#6
Scooby Regular
iTrader: (7)
cheers jura,cheers peter.runnin 411bhp/349lbs.
lookin to get the torque up and miby a we bit more power.
limited at the moment due to standard internals.
was advised by my garage of headers and also told the exhaust pulleys would be good as small adjustments can gain power/torque?
thanks again for reply.
lookin to get the torque up and miby a we bit more power.
limited at the moment due to standard internals.
was advised by my garage of headers and also told the exhaust pulleys would be good as small adjustments can gain power/torque?
thanks again for reply.
Yes headers I would add too,what turbo you are currently running,you are still running OE ECU?
Exhaust cam pulley,if you are running AVCS they're expensive(from £450 just for cam pulleys)
Jura
#7
Scooby Regular
Thread Starter
Join Date: Jan 2010
Location: glasgow
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
runnin hybrid gt30,standard mounted,standard size intake from cr turbos.avcs yes.standard ecu mapped by andrew carr(maffless) with switchable mapps and l/c and a/l.
Trending Topics
#11
Scooby Regular
Thread Starter
Join Date: Jan 2010
Location: glasgow
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
#12
Scooby Regular
iTrader: (7)
If you are want more torque,2.1L or 2.5L,2.35L is only option or try to run methanol(10 or 20%) and you will see gains like on the side of bhp or torque
As per comparison we are run MDX321T on 2.1L and we are made 490bhp/480lb-ft on 20% methanol and 452bhp/440lb-ft,friend running same turbo on 2.0L and he made 452bhp/440lb-ft and 480bhp/450lb-ft on 18% methanol
Jura
#13
Scooby Regular
Thread Starter
Join Date: Jan 2010
Location: glasgow
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
On 2.0L you can gain torque with smaller exhaust,assume you are running 3" exhaust,but still all depends on the turbo what you are running and on the supporting mods
If you are want more torque,2.1L or 2.5L,2.35L is only option or try to run methanol(10 or 20%) and you will see gains like on the side of bhp or torque
As per comparison we are run MDX321T on 2.1L and we are made 490bhp/480lb-ft on 20% methanol and 452bhp/440lb-ft,friend running same turbo on 2.0L and he made 452bhp/440lb-ft and 480bhp/450lb-ft on 18% methanol
Jura
If you are want more torque,2.1L or 2.5L,2.35L is only option or try to run methanol(10 or 20%) and you will see gains like on the side of bhp or torque
As per comparison we are run MDX321T on 2.1L and we are made 490bhp/480lb-ft on 20% methanol and 452bhp/440lb-ft,friend running same turbo on 2.0L and he made 452bhp/440lb-ft and 480bhp/450lb-ft on 18% methanol
Jura
car runs a 3in decatted all the way including bell mouth,650 injectors,fpr,walbro255,k+n,hybrid gt30,lightly ported headers.
just not to impresed by 349lbs of torque.
car has done a best but not consistant 12.5.
but resolved a high rev miss so hopin for more consistancy now.
again thanks alot.
ive got plans to visit york this year easter weekend japday(hopin to have more torque by then.)
#14
Scooby Regular
iTrader: (7)
thanks alot for all your help jura top man
car runs a 3in decatted all the way including bell mouth,650 injectors,fpr,walbro255,k+n,hybrid gt30,lightly ported headers.
just not to impresed by 349lbs of torque.
car has done a best but not consistant 12.5.
but resolved a high rev miss so hopin for more consistancy now.
again thanks alot.
ive got plans to visit york this year easter weekend japday(hopin to have more torque by then.)
car runs a 3in decatted all the way including bell mouth,650 injectors,fpr,walbro255,k+n,hybrid gt30,lightly ported headers.
just not to impresed by 349lbs of torque.
car has done a best but not consistant 12.5.
but resolved a high rev miss so hopin for more consistancy now.
again thanks alot.
ive got plans to visit york this year easter weekend japday(hopin to have more torque by then.)
Hi there
Personally I would have look for 3-bolt headers as per above from WMS,speak herewith Alyn@AS Performance about the Harvey Up pipe,you will gain like spool and hopefully torque
As I said depends on turbo,torque more depends more on engine size and on turbo itself(same turbo will make more on 2.0L,but will have less torque than on 2.1L or 2.5L,but usually on bigger cc making more like torque and hp)
12.5 is nice and really great time,we are done 11.8 in our wagon,still we are think is possible to do on old setup 11.5
York Raceway is on our list too,but in our problem will be is too far for us and we are not sure
Jura
#15
Scooby Regular
Thread Starter
Join Date: Jan 2010
Location: glasgow
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
Hi there
Personally I would have look for 3-bolt headers as per above from WMS,speak herewith Alyn@AS Performance about the Harvey Up pipe,you will gain like spool and hopefully torque
As I said depends on turbo,torque more depends more on engine size and on turbo itself(same turbo will make more on 2.0L,but will have less torque than on 2.1L or 2.5L,but usually on bigger cc making more like torque and hp)
12.5 is nice and really great time,we are done 11.8 in our wagon,still we are think is possible to do on old setup 11.5
York Raceway is on our list too,but in our problem will be is too far for us and we are not sure
Jura
Personally I would have look for 3-bolt headers as per above from WMS,speak herewith Alyn@AS Performance about the Harvey Up pipe,you will gain like spool and hopefully torque
As I said depends on turbo,torque more depends more on engine size and on turbo itself(same turbo will make more on 2.0L,but will have less torque than on 2.1L or 2.5L,but usually on bigger cc making more like torque and hp)
12.5 is nice and really great time,we are done 11.8 in our wagon,still we are think is possible to do on old setup 11.5
York Raceway is on our list too,but in our problem will be is too far for us and we are not sure
Jura
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM