Hi Guys, Quick Question...

I will be fitting a catch can to my Subaru over the weekend and needed some help...

I been told the correct way to do this is to route the two cam cover breathers and crank case breather to the catch tank.

The problem I got is the catch tank only has 2 ports on it, Therefore I can get the 2 cam cover breathers to it but not the crank case one.

So will it be OK if I was to put one of these mini breathers on the crank case instead of routing it to the catch can ???

http://www.ebay.co.uk/itm/Mini-Air-O...1150b3e&_uhb=1

 

I have done this with my 2 port catch can, But havent run outlet pipe as far under the car, Im not 100% if its the right way but i do get a build up of dirty oil in it.

 

i also have 2 port i put my drivers side breather to atmosphere and passenger side and pcv teed together and into tank then other port to atmosphere right under the car so passes cabin works for me no problems