What Mods for 400bhp
#1
Scooby Regular
Thread Starter
Join Date: May 2011
Location: Your mums house
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
What Mods for 400bhp
Hi to all,
Been looking recently into getting up to the 400bhp mark and was wondering what I would need to achieve that.
Car is a 2005 JDM STI currently running 344/370. So far I have done:
Thanks for your time.
Been looking recently into getting up to the 400bhp mark and was wondering what I would need to achieve that.
Car is a 2005 JDM STI currently running 344/370. So far I have done:
- Titanium Turbo-back decatted exhaust
- Pipecross panel filter
- Forge Re-circ DV
- Re-map
Thanks for your time.
Last edited by Wazz777; 03 October 2012 at 09:26 PM.
#3
Scooby Regular
iTrader: (4)
Join Date: Jan 2011
Location: Kent
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
If you have a VF37 on your car it wont make 400, probably 360ish on v power. I have a 2003 JDM STI now running 457bhp. I'd change the turbo to something like an sc42 twinscroll, bigger injectors, 3 port boost solenoid, upgrade the fuel pump to a walbro unit or similar. Should see over 400 with that lot. Depends if you want to run the standard airbox with the topmount or go front mount?
Matt
Matt
#4
Scooby Regular
Thread Starter
Join Date: May 2011
Location: Your mums house
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the replies lads.
I'd prefer to keep the TMIC and airbox as is. I've been looking at getting a second-hand turbo but are proving hard to find. Reccomendations on injector size?
I'd prefer to keep the TMIC and airbox as is. I've been looking at getting a second-hand turbo but are proving hard to find. Reccomendations on injector size?
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM