Notices
ScoobyNet General General Subaru Discussion
Sponsored by:
Sponsored by:

overheating help needed please…:(

Thread Tools
 
Search this Thread
 
Old 27 August 2012, 12:13 PM
  #1  
eelz
Scooby Regular
Thread Starter
iTrader: (10)
 
eelz's Avatar
 
Join Date: Jul 2009
Location: mostly in work
Posts: 613
Likes: 0
Received 0 Likes on 0 Posts
Default overheating help needed please…:(

Hi,

I've just drove 3 miles to get some go-go juice and whilst on the forecourt I noticed that the speedo cluster temp gauge was near the red.!!

other parameters are;

water temp gauge on auxiliary gauges was between 78-82 deg (sensor fixed to top rad hose)
oil pressure at idle was 2.8 bar
plenty of hot air through the vents when at travel but went coldish at standstill at lights and the speedo cluster temp gauge started rising again.!

oil on dipstick looked fine and coolant in radiator header tank looked fine (watery and green)

any ideas please.? sticking thermostat or head gasket about to go ??

many thanks in advance,

Dave
Old 27 August 2012, 12:18 PM
  #2  
tubbytommy
BANNED
iTrader: (20)
 
tubbytommy's Avatar
 
Join Date: Mar 2010
Location: crawley :)
Posts: 16,950
Likes: 0
Received 1 Like on 1 Post
Default

air lock possibly
Old 27 August 2012, 12:25 PM
  #3  
500
Scooby Senior
 
500's Avatar
 
Join Date: May 2006
Location: Greater Manchester
Posts: 3,202
Likes: 0
Received 0 Likes on 0 Posts
Default

Air lock is possible but I'd be looking at the water pump myself. Take cap off expansion tank, check level, start engine and see if you can see the water moving in the header tank.
Old 27 August 2012, 12:25 PM
  #4  
eelz
Scooby Regular
Thread Starter
iTrader: (10)
 
eelz's Avatar
 
Join Date: Jul 2009
Location: mostly in work
Posts: 613
Likes: 0
Received 0 Likes on 0 Posts
Default

can it just randomly do that though? (airlock)


due to a FMIC i have no room for the expansion tank so the pipe just runs off !

Last edited by eelz; 27 August 2012 at 01:10 PM.
Old 27 August 2012, 02:15 PM
  #5  
eelz
Scooby Regular
Thread Starter
iTrader: (10)
 
eelz's Avatar
 
Join Date: Jul 2009
Location: mostly in work
Posts: 613
Likes: 0
Received 0 Likes on 0 Posts
Default

Looks like it was an airlock issue.

phew.!
Old 27 August 2012, 07:06 PM
  #6  
alcazar
Scooby Regular
iTrader: (2)
 
alcazar's Avatar
 
Join Date: Jun 2002
Location: Rl'yeh
Posts: 40,781
Received 27 Likes on 25 Posts
Default

Keep an eye on it now: the HG could go son due to overheating
Old 27 August 2012, 07:30 PM
  #7  
eelz
Scooby Regular
Thread Starter
iTrader: (10)
 
eelz's Avatar
 
Join Date: Jul 2009
Location: mostly in work
Posts: 613
Likes: 0
Received 0 Likes on 0 Posts
Default

will do, was thinking of getting it replaced just as a precaution.

The temperature needle didn't quite hit the red but you never know.!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
taylor85
Wanted
2
13 September 2015 04:57 PM
AzzDSM
Engine Management and ECU Remapping
4
13 September 2015 03:59 PM
robbie1988
Wanted
2
13 September 2015 09:25 AM
Scooby-Doo 2
Wheels And Tyres For Sale
1
09 September 2015 06:51 PM
scottydouk
General Technical
0
07 September 2015 08:11 PM



Quick Reply: overheating help needed please…:(



All times are GMT +1. The time now is 09:37 AM.