Notices
ScoobyNet General General Subaru Discussion
Sponsored by:
Sponsored by:

Newbie with a very odd Bugeye question!

Thread Tools
 
Search this Thread
 
Old 17 July 2012, 11:25 AM
  #1  
garysykes35
Scooby Newbie
Thread Starter
iTrader: (1)
 
garysykes35's Avatar
 
Join Date: Jul 2012
Location: Kent
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Default Newbie with a very odd Bugeye question!

Hi All,

I'm new to the forum and new to Subaru too. I always fancied a bugeye and after the wife buggered off at the start of the year I finally bought one in February!

It's a blue WRX with an airfilter, exhaust back box, ecutek remap and blow off valve, other than those items it's a standard to look at.

Here's my odd question/problem:

On boost it leaks water out of the drivers side washer jet! I've taken the jets of to check for a crack and checked the lines and all seems fine. Also, the fabric bonnet cover thing is wet too.

I've googled the issue to death and can't seem to find anything so a friend told me to join the forum and ask the experts!!

Please help!

Thanks in advance!!
Old 17 July 2012, 11:28 AM
  #2  
d4vidh
Scooby Regular
 
d4vidh's Avatar
 
Join Date: Oct 2011
Location: Cambridge
Posts: 447
Likes: 0
Received 0 Likes on 0 Posts
Default

Are you sure its washer fluid and not coolant?
Old 17 July 2012, 11:33 AM
  #3  
garysykes35
Scooby Newbie
Thread Starter
iTrader: (1)
 
garysykes35's Avatar
 
Join Date: Jul 2012
Location: Kent
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Default

In all honesty I'm not 100% sure what it is. I guess I was just assuming it was washer fluid as it only leaks out of the washer jet. How would coolant get up there?
Old 17 July 2012, 11:44 AM
  #4  
Scott@ScoobySpares
Formerly ScoobyTeknix
iTrader: (64)
 
Scott@ScoobySpares's Avatar
 
Join Date: Feb 2011
Location: Fleetwood, Lancashire
Posts: 2,926
Likes: 0
Received 0 Likes on 0 Posts
Default

hi buddy there is a one way valve in the pipe work maybe that has failed allowing water to past through as when on boost the water is drawn out by the force, my own 98 did this with the rear washer jet (JDM) replaced the valve and it was fine

hope this helps

scott...
Old 17 July 2012, 11:46 AM
  #5  
d4vidh
Scooby Regular
 
d4vidh's Avatar
 
Join Date: Oct 2011
Location: Cambridge
Posts: 447
Likes: 0
Received 0 Likes on 0 Posts
Default

Do you have a picture? Is it headlight washer jet or bonnet washer jet. I dont think that boost would affect the washer pump system. More than likely a pin hole in a coolant pipe squirting out coolant when boosting (under pressure)
Old 17 July 2012, 12:21 PM
  #6  
Claaarkio
Scooby Regular
iTrader: (1)
 
Claaarkio's Avatar
 
Join Date: Apr 2002
Posts: 1,095
Likes: 0
Received 0 Likes on 0 Posts
Default

My rear one does it, and my bros' fq360 washers do it too, I think it would be worth sticking in a new one way valve as I assume the old ones get weak and allow water to pass too easily. You can get them off ebay for a few quid.

Dave

Last edited by Claaarkio; 17 July 2012 at 12:27 PM.
Old 17 July 2012, 12:39 PM
  #7  
garysykes35
Scooby Newbie
Thread Starter
iTrader: (1)
 
garysykes35's Avatar
 
Join Date: Jul 2012
Location: Kent
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Default

Hi D4VID, The coolant level has stayed solid and it leaks almost every time I drive it which is making me think its the washer fluid.

Thanks for all the advice, I've just ordered a one way valve that I'll stick on and see if it fixes it!

Thanks
Old 17 July 2012, 12:59 PM
  #8  
CharlySkunkWeed
Scooby Regular
iTrader: (7)
 
CharlySkunkWeed's Avatar
 
Join Date: Jun 2010
Location: Bangor-Northern Ireland
Posts: 3,499
Received 70 Likes on 48 Posts
Default

i had this on mine after i detailed it. Was annoyed as after 1st drive there was water all down the bonnet !

I swapped the jets over and it stopped for a while , then the same side leaked even though it was the jet from the other side ! I fiddled about with the pipework and swapped the jets back over and its been fine since.

Definitely a weird one .
Old 18 July 2012, 12:38 AM
  #9  
garysykes35
Scooby Newbie
Thread Starter
iTrader: (1)
 
garysykes35's Avatar
 
Join Date: Jul 2012
Location: Kent
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Default

Hi All,

Just wanted to quickly say thank you. I grabbed a new one way valve from my parts department for a whopping £1.79 and it has done the job!

Thanks guys
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
04 November 2021 07:12 PM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM
Raptorman
ScoobyNet General
0
01 October 2015 06:46 PM
speedrick
Subaru Parts
0
28 September 2015 01:06 PM
speedrick
Subaru Parts
0
26 September 2015 02:58 PM



Quick Reply: Newbie with a very odd Bugeye question!



All times are GMT +1. The time now is 12:03 AM.