Toad Alarm Advice Needed
#1
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Feb 2007
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
Toad Alarm Advice Needed
Hi I have a Toad Ai606 alarm installed on by Subaru has been working fine for years. I put it into my local garage and since then the key fob doesn't seem to do anything. The light comes on when you press the fob button but doesn't seem to do anything. I had to disconnect the immobilisers from the fuel pump and ignition so i could drive the car home. Just wondered if anyone had any ideas.
#2
Scooby Regular
iTrader: (13)
Join Date: Apr 2010
Location: Swansea
Posts: 4,008
Likes: 0
Received 0 Likes
on
0 Posts
Hi I have a Toad Ai606 alarm installed on by Subaru has been working fine for years. I put it into my local garage and since then the key fob doesn't seem to do anything. The light comes on when you press the fob button but doesn't seem to do anything. I had to disconnect the immobilisers from the fuel pump and ignition so i could drive the car home. Just wondered if anyone had any ideas.
There is also a pin code you can enter by turning the ignition on and off.
Originally Posted by Toad
Introducing radio keys
Your alarm systems can accommodate up to 4 radio keys. To use a new key with your system it is simply necessary to introduce the key to the system, as follows:
a) Turn the ignition on and off twice and-then turn the ignition back on within a 7 second period.
b) LED fast flashes for 3 seconds.'
c) Enter the PIN code as described previously.
d) Turn the ignition back on and press button 1 on a new transmitter to teach it to the system.
e) Turn the ignition off
f) Leave the ignition off for 25 seconds to exit or turn the ignition back on to enter software switch routine.
Your alarm systems can accommodate up to 4 radio keys. To use a new key with your system it is simply necessary to introduce the key to the system, as follows:
a) Turn the ignition on and off twice and-then turn the ignition back on within a 7 second period.
b) LED fast flashes for 3 seconds.'
c) Enter the PIN code as described previously.
d) Turn the ignition back on and press button 1 on a new transmitter to teach it to the system.
e) Turn the ignition off
f) Leave the ignition off for 25 seconds to exit or turn the ignition back on to enter software switch routine.
Thread
Thread Starter
Forum
Replies
Last Post
robbie1988
Wanted
2
13 September 2015 09:25 AM
Scooby-Doo 2
Wheels And Tyres For Sale
1
09 September 2015 06:51 PM