I have 2 sets of Mcgard lockers on my current wheels but the replacement Team dynamic wheels need those small wheel nuts, i`m only assuming my mcgard ones wont fit either,so, what lockers dofit this wheel ?

cheers

 

tuner nuts you want mate do a search on ebay you will find plenty on there make sure you get steel ones tho and not the alloy ones as they work lose

 

cheers bud, i found Mcgard do a style that suits also

http://www.ebay.co.uk/itm/MCGARD-LOC...item45ecdd2b83

 

ye they will do the job mate

 

Rig, I have TD Monza Rs on mine - And I also have the McG slim tuner nuts. I'll try to find out the product code asap.....

 

25257 SU.

M12 x 1.5mm

Slim tuner nuts with cone seat (to suit the shape of the bolt holes. Plus they're solid, with the sort of 'rounded star'-shaped key recess i.e. much nicer looking than the open ones in your link, IMO.

 

Cheers, i think they are the correct ones, Not sure the ones i put a link too would work comparing the 2, cheers bud

Edit...

Saying that, the Team dynamic wheels i have also use a cover plate to hide the wheel bolts, not sure if the ones in your link would protrude too much ????

 

Oh hold on, are the Subaru's M12 x 1.25mm (and not 1.5mm), instead?

If so, scratch the above.

But if so, then I'm now confused. As I've got the packaging here in front of me...



...and I'm certain these were fitted to my previous WRX.

 

Yes 1.25 pitch mate . We are just looking to design some soon

 

So,it looks like i will need this set then,as i have a cover plate that uses an allen key that covers the bolt holes

Part no. - 24013SU
Thread size - M12x1.25
Seat - CONE
Nut Height - OPEN ENDED
Hex size 19/21 mm
Set - 4 nuts & key





Joz,maybe you had these fitted


This part no is a direct fitment on the thread and wheel brace for Subaru Impreza.

Part no. - 25254
Thread size - M12x1.25
Seat - 60 degrees
Hex size - 21 mm
Set - 4 nuts & key

 

But,when you see these being sold,makes you think nothings safe really

http://www.ebay.co.uk/itm/Locking-Al...92708456959166

 

This is the wheels,(Not my car) see what i mean about the centre bolts being covered,so,which ones do i get ?

 

It all comes back to mr now! lol ...

Those 1.5mm ones must have been fitted to my FTO - when I bought Rota GRAs for it.

And the 1.25mm ones you list above Rig, were indeed what I had on my previous WRX. Bascially the same style but with 1.25mm thread pitch instead.

 

I happen to have open ended nuts/locking nuts on my TD Monza Rs on my STi 5, as they came bundled with them. These alloys have fake 'centre nut' covers too - even though I left 'em off for that 'serious motorsport look' lol - so the short open-ended type nuts are obviously designed to fit under the covers.

 

Cool,i just fitted the wheels to see if they fit/clear my brakes etc, they do, cool, but the tuner wheel nuts supplied with them are too long, so the damn cover plate that hides the wheel nuts wont bloody fit, so now i have to see if i can find some tuner wheel bolts that are open ended so they allow the cover to fit,grrrr LOL

cheers