Zun sport grilles
#1
Scooby Regular
Thread Starter
Join Date: Sep 2011
Location: Ipswich
Posts: 1,041
Likes: 0
Received 0 Likes
on
0 Posts
Zun sport grilles
Hi all.
I am thinking of buying this grill set from scooby parts and have done lots of searching tonight and found lots of info on here, but can't find a fitting guide.
Is there one? I see you have to drill to fit the lower grill. Is the easy to do or not?
Thanks.
I am thinking of buying this grill set from scooby parts and have done lots of searching tonight and found lots of info on here, but can't find a fitting guide.
Is there one? I see you have to drill to fit the lower grill. Is the easy to do or not?
Thanks.
#7
Scooby Newbie
Join Date: May 2011
Location: Northwood, Middlesex
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
They come with a fitting guide....the top grille is easy, just clips in, the bottom one...ill just say once you've measured where your holes are going to be drilled in the bottom of the bumper, double and triple check its right and lines up before you drill!
Trending Topics
#8
Scooby Regular
Thread Starter
Join Date: Sep 2011
Location: Ipswich
Posts: 1,041
Likes: 0
Received 0 Likes
on
0 Posts
Yes, I'll measure twice or even three times and drill once. Thanks.
#9
I have the Zunsport lower grille on a Blob. There is no drilling or screws necessary. You simply cover the clips with a length of masking tape push home, pull forward and the clip into place. Remove thetape and enjoy. I dug out the instructions to check, there is no mention of drilling or screws.
#11
I have the Zunsport lower grille on a Blob. There is no drilling or screws necessary. You simply cover the clips with a length of masking tape push home, pull forward and the clip into place. Remove thetape and enjoy. I dug out the instructions to check, there is no mention of drilling or screws.
Yes..a 5 min job no drilling involved.
#12
BANNED
iTrader: (20)
there are two versions. a half size one that clips in and the full length version which is called wr1 style i think.
the wr1 version requires drilling a few holes,
i have this version and it is easy enough to fit, i think there are 7 holes from memory, four along the top (one at each top corner and two behind number plate, and three along the bottom where prongs locate.
the wr1 version requires drilling a few holes,
i have this version and it is easy enough to fit, i think there are 7 holes from memory, four along the top (one at each top corner and two behind number plate, and three along the bottom where prongs locate.
Last edited by tubbytommy; 21 October 2011 at 01:32 PM.
#14
BANNED
iTrader: (3)
write to jane.langston@zunsport.co.uk about full lenght grille
below my mail copy
"That is fine only the Full Lower Grille is not on our web site if you wish to buy off the web site you can buy the normal Blobeye Full Set using your Discount Code and when I receive the order I will change it to the Full Length version for you. Once you have put in your Discount code please press apply discount this will then take off 15% for you"
below my mail copy
"That is fine only the Full Lower Grille is not on our web site if you wish to buy off the web site you can buy the normal Blobeye Full Set using your Discount Code and when I receive the order I will change it to the Full Length version for you. Once you have put in your Discount code please press apply discount this will then take off 15% for you"
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM