Edge covering for bumper?
#1
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Feb 2009
Location: Glasgow
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
Edge covering for bumper?
I have just fitted my Japspeed FMIC to my Hawkeye which involved ALOT of bumper chopping to get it to fit.
Does anyone know where I could get some kind of covering for the edges where I have cut the bumper to tidy it up?
Does anyone know where I could get some kind of covering for the edges where I have cut the bumper to tidy it up?
#3
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Feb 2009
Location: Glasgow
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
I have it fitted now. I had to get one pipe modified to fit properly, it had to be cut and welded back together as it was too long.
The only part of the kit I am worried about is the coolant expansion tank, it does seem very small and I am not sure how much coolant I should put in it.
The only part of the kit I am worried about is the coolant expansion tank, it does seem very small and I am not sure how much coolant I should put in it.
#4
Scooby Regular
iTrader: (7)
I have it fitted now. I had to get one pipe modified to fit properly, it had to be cut and welded back together as it was too long.
The only part of the kit I am worried about is the coolant expansion tank, it does seem very small and I am not sure how much coolant I should put in it.
The only part of the kit I am worried about is the coolant expansion tank, it does seem very small and I am not sure how much coolant I should put in it.
If yes Perrin or other companies made special Overflow bottles,something like this
http://www.tsl-motorsport.co.uk/news...07&detail=296#
Jura
#6
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Feb 2009
Location: Glasgow
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
I ended up find stuff:
http://cgi.ebay.co.uk/RED-PVC-rubber...#ht_1381wt_907
I was just looking for something to cover up the cut edges on the bumper.
With regards to the coolant expansion/overflow tank, the one supplied with the Japspeed kit is very small but to be honest that Perrin one doesnt look any bigger.
http://cgi.ebay.co.uk/RED-PVC-rubber...#ht_1381wt_907
I was just looking for something to cover up the cut edges on the bumper.
With regards to the coolant expansion/overflow tank, the one supplied with the Japspeed kit is very small but to be honest that Perrin one doesnt look any bigger.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM