Prodrive geometry settings.
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jun 2010
Location: Peterborough
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
Prodrive geometry settings.
Hi guys, does anyone know the prodrive geometry settings for an 02 bugeye wrx?
Having done a search Im not too sure if the threads I've found refer to newage or classics, or wether there is indeed any difference?
www.confused.com
Having done a search Im not too sure if the threads I've found refer to newage or classics, or wether there is indeed any difference?
www.confused.com
#2
these are the settings I'm using with prodrive spring kit fitted & these were supplied to me, although 05 Blobeye
For a DCCD-A car: -
Front Camber (make sure it's equal side to side)
Minimum -1° 10’ Preferred -1° 15’ "Track" -1° 20’ / -1° 30’
Front Toe-in (Total) Minimum 0° 02’ Preferred 0° 06’ Maximum 0° 10’
Front Caster Standard Subaru (more is good)
3° 30’
Rear Camber Standard Subaru (make equal side to side if at all possible)
-1° 40’
Rear Toe-in (Total) Minimum 0° 06’ Preferred 0° 10’ Maximum 0° 14’
Thrust angle Minimum -0° 01’ Preferred 0° 00’ Maximum 0° 01’
Non DCCD-A car is the same accept: -
Front Toe-in (Total) Minimum 0° 00’ Preferred 0° 01’ Maximum 0° 03’
(Tolerance: 0±3 mm (0±0.12 in), Toe angle (The sum of both wheels): 0°±15′ Adjustment standard: 0±2 mm (0±0.08 in), Toe angle (The sum of both wheels): 0°±10′)
Rear Toe-in (Total) Minimum 0° 02’ Preferred 0° 6’ Maximum 0° 10’
(Tolerance: 0±3 mm (0±0.12 in), Toe angle (The sum of both wheels): 0°±15′ Adjustment standard: 0±2 mm (0±0.08 in), Toe angle (The sum of both wheels): 0°±10′)
a) Set the tyre pressures to:
Front 2.3 bar (33 psi)
Rear 2.2 bar (32 psi)
For a DCCD-A car: -
Front Camber (make sure it's equal side to side)
Minimum -1° 10’ Preferred -1° 15’ "Track" -1° 20’ / -1° 30’
Front Toe-in (Total) Minimum 0° 02’ Preferred 0° 06’ Maximum 0° 10’
Front Caster Standard Subaru (more is good)
3° 30’
Rear Camber Standard Subaru (make equal side to side if at all possible)
-1° 40’
Rear Toe-in (Total) Minimum 0° 06’ Preferred 0° 10’ Maximum 0° 14’
Thrust angle Minimum -0° 01’ Preferred 0° 00’ Maximum 0° 01’
Non DCCD-A car is the same accept: -
Front Toe-in (Total) Minimum 0° 00’ Preferred 0° 01’ Maximum 0° 03’
(Tolerance: 0±3 mm (0±0.12 in), Toe angle (The sum of both wheels): 0°±15′ Adjustment standard: 0±2 mm (0±0.08 in), Toe angle (The sum of both wheels): 0°±10′)
Rear Toe-in (Total) Minimum 0° 02’ Preferred 0° 6’ Maximum 0° 10’
(Tolerance: 0±3 mm (0±0.12 in), Toe angle (The sum of both wheels): 0°±15′ Adjustment standard: 0±2 mm (0±0.08 in), Toe angle (The sum of both wheels): 0°±10′)
a) Set the tyre pressures to:
Front 2.3 bar (33 psi)
Rear 2.2 bar (32 psi)
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM