rapid.STI

iTrader: (5)

Hello all.

I need to remove my glass from my front fog lights. Does any 1 no how long they go in the oven for? what temp? is there a guide anywhere??

Thanks guys.

alcazar

iTrader: (2)

Not seen it done of fogs, afaik, it's not the same as the headlights.
Out of interest, WHY do you need to separate them?

rapid.STI

iTrader: (5)

i have a set of crystall fogs, 1 of which all the brackets are broke, i wanted to swap the backing from my old 1 to the crystall.

I cant imagine why its not possible with the fogs, ive done it many times with the heat gun but it takes time and does not get the glue evenly warm.

Pink_Floyd

This has got me thinking........

My Bug STi headlights have a couple of stone chips. Could I split them down and use normal Bug headlight plastic/glass to repair? It would save buying two new STi headlights.......

rapid.STI

iTrader: (5)

Hi mate. hope ya well? It is possible to remove the glass from the bugeye headlight. landychris who bought my subaru had to do it to fit a conversion kit into them to make them legal in his country. im just waiting for him to forward the guide and i'll pass it onto you

LandyChris

Hi all, hi Wayne,

to remove the glass from the bugeye headlight, just put the headlight in the oven for 30 min at a temp of 70 °C. Afterwards don't forget do remove the 2 screws!
This should help:
http://my.opera.com/xennon/blog/2008...conversion-diy

Wayne, will call you tomorrow or monday
chris

alcazar

iTrader: (2)

Helloooooooo? The O/P was talking about removing glass from FOGlights